Nagios monitors dell server hardware and nagios monitors dell

Source: Internet
Author: User
Tags snmp port install perl

Nagios monitors dell server hardware and nagios monitors dell

We have mentioned earlier that omsa is used to monitor dell servers, but it must be accessed through web. This time we use nagios + check_openmanage to monitor the hardware of dell servers.

First, let's look at the figure below:


We can see that there are two ways to achieve monitoring:

1. The nagios server check_nrpe calls the check_openmanage of the monitored server. This method requires omsa and check_openmanage to be installed on the monitored server.

2. the nagios server directly uses check_openmanage for remote monitoring. In this way, perl-Net-SNMP must be installed on the nagios server, omsa and snmp must be installed on the monitored server, and the snmp service must be installed first, then install omsa, so that omsa will automatically change the snmp configuration file for monitoring.


My personal feeling: The second method is more convenient, and you only need to install it. The first method also needs to configure the nagios client. In addition, check_nrpe will consume server performance; therefore, the following is implemented using snmp.

1. Configure the nagios Server

1. Install check_openmanage on the nagios Server

 wget http://folk.uio.no/trondham/software/files/check_openmanage-3.7.12.tar.gz tar -xvf check_openmanage-3.7.12.tar.gz cd check_openmanage-3.7.12 cp check_openmanage /usr/local/nagios/libexec chown nagios.nagios /usr/local/nagios/libexec/check_openmanage cp man/check_openmanage.8 /usr/share/man/man8 cp man/check_openmanage.conf.5 /usr/share/man/man5
2. Install perl-Net-snmp on the nagios Server

 Centos5  wget http://mirrors.zju.edu.cn/epel/5/i386/epel-release-5-4.noarch.rpm rpm -ivh epel-release-5-4.noarch.rpm Centos6 wget http://mirrors.zju.edu.cn/epel/6/i386/epel-release-6-8.noarch.rpm rpm -ivh epel-release-6-8.noarch.rpm yum install perl-Net-SNMP perl-Config-Tiny

In SNMP monitoring mode, check_openmanage requires perl-Net-SNMP support. Otherwise, the following error occurs:

ERROR: You need perl module Net: SNMP to run check_openmanage in SNMP mode

Now our nagios server has been installed

2. Configure the monitored end

1. Install the snmp service

Yum-y install net-snmp-devel net-snmp-utils

2. Install omsa

The wget-q-O-http://linux.dell.com/repo/hardware/latest/bootstrap.cgi | bash
Yum install srvadmin-all

3. Start the omsa Service

/Opt/dell/srvadmin/sbin/srvadmin-services.sh start

4. view the port

Netstat-ntlp | grep: 1311

If this port is available, it indicates that our srvadmin has been successfully installed. If it is not available, it may be due to an installation problem; in addition, we start with/opt/dell/srvadmin/sbin/srvadmin-services.sh start for the first time after installation, otherwise start with service dataeng start may be problematic, resulting in omsa not fully started.

Note:

(1) be sure to install the snmp service before installing omsa, so that omsa will automatically configure your snmp service. If the order is reversed, an error may be reported:

ERROR: (SNMP) OpenManage is not installed or is not working correctly

This is because our/etc/snmp/snmpd. conf configuration file is missing, mainly including the following)

View all supported ded. 1

Access notConfigGroup "" any noauth exact all none

Smuxpeer. 1.3.6.1.4.1.674.10892.1

(2) If the error "snmp critical: No response from remote host 'x. X. X. x'" is reported, the snmp service is not installed on the monitored end.

3. Configure monitoring items

1. Configure command

# Check the storage device define command {command_name check_storage command_line $ USER1 $/check_openmanage-H $ HOSTADDRESS $ -- only storage-p-s-B ctrl_fw = 0} # Check cpudefine command {command_name check_cpu command_line $ USER1 $/check_openmanage-H $ HOSTADDRESS $ -- only cpu-p-s-B ctrl_fw = 0} # Check memory define command {command_name check_memory command_line $ USER1 $/check_openmanage-H $ HOSTADDRESS $ -- only memory-p-s-B ctrl_fw = 0} # Check power define command {command_name check_power command_line $ USER1 $/check_openmanage-H $ HOSTADDRESS $ -- only power-p -s-B ctrl_fw = 0} # check the temperature define command {command_name check_temp command_line $ USER1 $/check_openmanage-H $ HOSTADDRESS $ -- only temp-p-s-w $ ARG1 $- c $ ARG2 $-B ctrl_fw = 0}

Here, -- only refers to monitoring only one item,-p is for drawing,-s is for status description, and-B is for blacklist, because our server firmware version is low, to remove other metrics from the blacklist.


2. Configure the Monitoring Service Group

define servicegroup {    servicegroup_name dell-openmanage    alias   Dell server health status}

3. Configure the Monitoring Service

 define service{    use                     local-service        host_name               usvr-131,usvr-119,usvr-70,usvr-71,usvr-72,usvr-73,usvr-82,usvr-83,usvr-84,usvr-85,usvr-86,usvr-87    service_description     omsa_storage    check_command           check_storage    service_groups          dell-openmanage    notifications_enabled   1       }   define service{    use                     local-service        host_name               usvr-131,usvr-119,usvr-70,usvr-71,usvr-72,usvr-73,usvr-82,usvr-83,usvr-84,usvr-85,usvr-86,usvr-87    service_description     omsa_cpu    check_command           check_cpu    service_groups          dell-openmanage    notifications_enabled   1       }   define service{    use                     local-service        host_name               usvr-131,usvr-119,usvr-70,usvr-71,usvr-72,usvr-73,usvr-82,usvr-83,usvr-84,usvr-85,usvr-86,usvr-87    service_description     omsa_memory    check_command           check_memory    service_groups          dell-openmanage    notifications_enabled   1       }   define service{    use                     local-service        host_name               usvr-131,usvr-119,usvr-70,usvr-71,usvr-72,usvr-73,usvr-82,usvr-83,usvr-84,usvr-85,usvr-86,usvr-87    service_description     omsa_power    check_command           check_power    service_groups          dell-openmanage    notifications_enabled   1       }   define service{    use                     local-service        host_name               usvr-131,usvr-119,usvr-70,usvr-71,usvr-72,usvr-73,usvr-82,usvr-83,usvr-84,usvr-85,usvr-86,usvr-87    service_description     omsa_temp    check_command           check_temp!"0=30/15"!"0=40/10"    service_groups          dell-openmanage    notifications_enabled   1       } 

4. Check the configuration file and reload the configuration file.

Nagioscheck

Service nagios reload

Iv. Firewall Configuration

We use SNMP for monitoring. Therefore, we need to enable the snmp port udp 161 on the nagios server on the monitored side.

/Sbin/iptables-a input-I em1-p udp-s 10.10.5.89 -- dport 161-m comment -- comment "nagios snmp"-j ACCEPT


OK. Now the dell server hardware monitoring configuration is complete.



Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.