Network experts teach you how to configure the H3C speed limit of a Huawei switch (1)

Network experts teach you how to configure the H3C speed limit of a Huawei switch. The following describes the H3C speed limit of a Huawei switch: data configuration steps, SwitchA configurations, and S3528, S3552 Series Switch Port Speed Limit configuration procedures.

The H3C Huawei switch has the following methods:
Line-rate (lr)
Speed
Traffic-limit
Qoscar

The second layer is more accurate, such as lr and speed. The third layer is not accurate.
For example, traffic-linit, qoscar)
Lr:
E050: (credibility 100%)
[Quidway-Ethernet0/1] line-rate?
INTEGER <1-100> Targetrate (Mbps
S5500: (credibility 100%)
[S5500-GigabitEthernet1/0/1] qoslroutboundcir?
INTEGER <64-1000000> CommittedInformationRate (kbps), itmustbeamultipleof64
Speed: (reliability 100%)
-[S5500-GigabitEthernet1/0/1] speed?
10Specifyspeedofcurrentport10Mb/s
100Specifyspeedofcurrentport100Mb/s
1000Specifyspeedofcurrentport1000Mb/s
AutoEnableport 'sspeednegotiationautomatically
Traffic-limit: (Reliability: 50%. When 50 MB is set, the bandwidth is about 7 mb. When 10 MB is set, the bandwidth is about 1 MB)
[QuidwayE050-Ethernet0/1] traffic-limitinboundip-group2000?
INTEGER <1-100> Targetrate (Mbps)
Link-groupApplythelink-basedacl
RuleSpecifytheIDofaclrule
Qoscar: (s5500) (Reliability: 50%. When 9.6M is set, the bandwidth is about 5 MB)
Aclnumber2000
Rule0permitsource10.0.0.00.0.0.255
Trafficclassifierliukongoperatorand
If-matchacl2000
Trafficbehaviorliukong
Carcir9600cbs200000ebs4000greenpassreddiscardyellowpass
Qospolicyliukong
Classifierliukongbehaviorliukong
InterfaceGigabitEthernet1/0/1
Qosapplypolicyliukonginbound

Huawei switch H3C speed limit supplementary Description: Switch Port Speed Limit
Vswitches of the 2000_EI series and above can speed up! Different switches have different speed limits! 2000_EI enter the LINE-RATE (4) parameter in the port view. Optional!

H3C speed limit configuration of Huawei Switch
Functional requirements and networking description, port speed limit configuration.

"Environmental parameters for H3C speed limit configuration of Huawei switches 』
The IP addresses of PC1 and PC2 are 10.10.1.1/24 and 10.10.1.2/24, respectively.

"Huawei switch H3C speed limit networking requirements 』
Configure the port speed limit on SwitchA, set the download speed of PC1 to 3 Mbps, and set the upload speed of PC1 to 1 Mbps.

Data configuration steps

"S2000EI Series Switch Port Speed Limit configuration process 』
Use the line-rate command under the Physical Ethernet port to speed up the inbound and outbound packets of the port.

SwitchA configurations]
◆ Enter the configuration view of port E0/1 [SwitchA] interfaceEthernet0/1
◆ Port E0/1 outbound packet traffic speed limit to 3 Mbps [SwitchA-Ethernet0/1] line-rateoutbound30
◆ Port E0/1 inbound packet traffic speed limit to 1 Mbps [SwitchA-Ethernet0/1] line-rateinbound16