(1) FTP or TFTP transfer application files (operating system)
Both FTP and TFTP are C/s architectures
The commands associated with the file system on the H3C device are entered in User view <>
(2) The router is configured as an FTP server:
[] FTP server Enable
[] local-user HX(user name)
Password simple 123456(password)
Service-type FTP
Authorization-attribute Level 3(if you do not authorize user levels of 3, you cannot perform a put operation)
If the PC is a Windows system, go to the command line interface
A. Switch directory: CD c : \ (Enter the C-drive, input D, you can enter the D-drive)
B.ftp IP(Router) x.x.x.x
C. User name: Password:
D. prompt Login,ftp Login Success
D.get or put(PC is client, router is server)
E. local file name: Remote file name:
(3)TFTP transfer file: (PC as server, router as client)
Installing TFTP server Software on a.pc (e.g. 3Comtftp software)
B. The router enters the user view:
< >tftp 192.168.1.2(server IP) get/put Hello.txt(file name)
(4) Common commands:
User View
< > Reset saved-configuration erase configuration (delete the most recently generated start profile on the device)
< > Reboot restart device
< > Save configuration (Save the commands in the current profile to the start profile)
< > mkdir directory name creation directory
< > rmdir directory name Delete directory
< > pwd shows the current working path
< > Dir displays directory or file information
< > Detete file name Delete files (files can be recovered, files still occupy storage space)
< > Undelete file name recovery Delete files
< > Reset Recycle-bin completely remove files from Recycle Bin
< > delete/ureserved Delete Files completely
System View
(5) device configuration command saved to the management PC
A. Copy and paste
B. Transfer function of utility Terminal software (transmit or receive ASIC code)
(6)-rw-Read and write files
drw-read-Write directory
Xxxx.bin application files (uncompressed files for the operating system)
Xxxx.cfg start configuration file (saved configuration command)
Xxxx.log log files
CF card: External flash, equivalent to the phone SD card
Start configuration (saved-configuration): stored in Flash.
Current configuration (current-configuration): stored in RAM.
Network Device file Management