Network switch Device Simple configuration

To configure the switch, a computer must be connected to the console port of the switch using a serial cable.
Serial cable

Console port of the switch

The line needs to be in the computer's Device Manager to see if the connection is successful;

Connect using the CRT software

Switch control port password cleanup
1, when starting, press Ctrl+b to enter the Bootrom directory

2, enter the bootrom password
3, enter 7, clear the console password


4, input 1, the default mode into the system

5. Wait for it to enter the system

Huawei Switch Configuration Empty
1. Log in to the Huawei switch and enter the Reset saved-configuration command.

2, whether initialize, enter Y return
3. Restart the switch after initialization, enter reboot

4. Reset the password after successful restart.

5, 2 times the password setting is complete.
6. Use display current to view the present configuration.

7, pay attention to see if the configuration is our previous configuration.

Network switch Device Simple configuration