New Generation Tp-link Router tplogin.cn set address cannot open solution

This paper introduces a new generation of Tp-link routers tplogin.cn login can not open the solution, in the next generation of Tp-link routers, no longer use the 192.168.1.1 management address, but use the tplogin.cn domain name to log into the router's management interface, user-friendly memory.

If the user enters tplogin.cn in the browser can not open, may be caused by the following reasons:1, router connectivity problems, 2, computer IP settings problem 3, browser settings .

Solution One: properly install the router

　　1, telephone line users : Please prepare 2 short network cable, a network cable used to connect the ADSL modem or light cat on the network cable interface and the WAN interface on the router; another network cable, one connected to the computer, and the other connected to the 1/2/3/4 arbitrary interface on the router.

　　2, Optical brazing users: users need to prepare 2 network cable, one of the network cable used to connect the optical cat and the router WAN interface, another network cable used to connect the computer and router LAN interface (any one of the 1/2/3/4 can).

　　3, Internet network : Please prepare 1 short network cable, network cable households: refers to the broadband operators to provide a network cable to the user's home; Please first plug the network cable from the broadband operator into the WAN interface on the router, and then connect the prepared cable to the computer, The other end connects the 1/2/3 arbitrary interface on the router.

　　Note: After the connection completes, notice if the corresponding interface led on the Tp-link router is lit.

Solution Two: Set up the computer IP address correctly

When connecting the router to the Internet, the computer's IP address is best configured to automatically obtain (dynamic IP address) , so that the computer can automatically obtain the IP, gateway, DNS and other information from the DHCP server on the Tp-link router. Specific configuration method Please read the article: Computer dynamic IP Address set up method.

　　Workaround Three: Configure the browser

1, run IE browser, click the "Tools"--> Select "Internet Options."

2. Select "Connect"--> to remove dial-up connections in the dial-up and virtual private network settings option--> select LAN Settings.

3, check "Automatic Detection Settings"--> "OK".

4, select Menu "Tool"--> "file"--> Cancel "offline operation (W)" in front of √, if the item is not enabled, you do not have to set.

As long as the device is connected correctly, the computer IP address is configured correctly, and the browser is configured correctly, the login interface can be opened by entering tologin.cn in the browser, and if you still cannot open the Tp-link router, restore the factory settings and reconfigure it. If you can't open it, it's probably a problem with the router.

　　Workaround Four: Use wireless connection settings

After completing the above three steps, still can not open tplogin.cn, and you have a notebook computer, then you may use the notebook network to search and connect to the Tp-link router's wireless network (Tp-link router By default has wireless network enabled, and there is no password, you can directly connect), It is then set up.

　　Workaround five: Restore the router to factory settings

If you try all the way and still can't open the tplogin.cn in the browser, please restore your router to the factory settings and set it up again.

　　the way to restore factory settings : Tp-linik router has a oss/reset button, press and hold this button for more than 5 seconds, you can restore to the factory settings, and then enter the tplogin.cn in the browser will appear to set the login password interface.

Oss/reset button

Note the problem:

If you enter in the browser: tplogin.cn, open the Telecommunications Light Cat login page, as shown in the following figure; Solution please read the article: tplogin.cn Open is the telecom login page solution

Tplogin.cn Open is the telecom login page