First of all, first brush Ensan powerful bootloader,
1. Download the corresponding bin package:
Http://www.right.com.cn/forum/thread-161906-1-1.html
2. Connect the router and computer with a network cable
3. Power off the router
4, press and hold the Reset key, plug the power supply until the flashing light, release the reset button
5, Computer Browser access 192.168.1.1
6. Select the first step to download on the bin pack brush
7, after completion, according to step 4, 5, then entered the breed Bootoader
After entering, select firmware Update, you can choose any firmware brush.
8, this article is selected here is Padavan, ASUS changed the firmware
Download Address http://www.right.com.cn/forum/thread-161324-1-1.html
Wireless relay Settings
Select, advanced settings, wireless 2.4GHz, wireless bridging
Wireless AP Operating Mode SELECT AP Client + AP
Wireless AP Client Role Select Wan
(LAN is connected in series, that is, there is no DHCP service, with the upper route with the IP segment)
Click on the STA SSID, then the base station search, select the signal to relay
Choose the encryption method and password
Save, OK.
The SSID of the trunk can be set in the general settings
Doesn't seem to be able to relay with 5G.