Newifi Mini Router brush ASUS Padavan firmware and Wireless relay notes

First of all, first brush Ensan powerful bootloader,

1. Download the corresponding bin package:

Http://www.right.com.cn/forum/thread-161906-1-1.html

2. Connect the router and computer with a network cable

3. Power off the router

4, press and hold the Reset key, plug the power supply until the flashing light, release the reset button

5, Computer Browser access 192.168.1.1

6. Select the first step to download on the bin pack brush

7, after completion, according to step 4, 5, then entered the breed Bootoader

After entering, select firmware Update, you can choose any firmware brush.

8, this article is selected here is Padavan, ASUS changed the firmware

Download Address http://www.right.com.cn/forum/thread-161324-1-1.html

Wireless relay Settings

Select, advanced settings, wireless 2.4GHz, wireless bridging

Wireless AP Operating Mode SELECT AP Client + AP

Wireless AP Client Role Select Wan

(LAN is connected in series, that is, there is no DHCP service, with the upper route with the IP segment)

Click on the STA SSID, then the base station search, select the signal to relay

Choose the encryption method and password

Save, OK.

The SSID of the trunk can be set in the general settings

Doesn't seem to be able to relay with 5G.