Open AHCI No reload system
Now provides a tool for you to update AHCI drives directly under Windows, and reboot the AHCI hard drive mode in the BIOS to get it done. First download the Skyiar v0.5 software in the Windows family, click Run.
You can see that the software automatically recognizes the Windows operating system and is automatically checked for Ide/sata, RAID, and so on for the current motherboard disk controller. Then check the "Clean target system disk controller Driver" option, click the "Execute" button, then the software will drive the disk controller in the system to remove, restore to the system before the state of installation.
Then reboot the computer, enter the BIOS, and set the Ide/sata mode to AHCI. After the BIOS has been modified to enter the system, the system will automatically install the AHCI driver, the system will require a reboot after completion, then the hard drive AHCI mode is open.