Nodemanger in Ubuntu remotely starts the managed Machine

After a few days, I finally successfully shared it with you. It was really a great deal of network sharing, and it was useless.

Both machines are Ubuntu

Weblogic10.3.3

Adminserver IP: 192.168.1.46

Remote machine IP Address: 192.168.1.20.

Project: Start a remote managed machine with adminserver

Create a service IP Address: 192.168.1.20.the service port of the managed Machine

The server name must be the same as the name of the remote server.

Go to the server> General Information> Start the SSL listener (selected)

Go to the server> SSL> verify Host Name> select none

Note that your current domain has two servers, adminserver and the service you just created, to be set

Create a machine and click base_doamin-> environment-> Computer-> New

Machine (machine1) added

Click machine1 to enter the settings page. Generally, you do not need to modify the information. Set the Node Manager IP address to the IP port of the managed machine by default.

Server Page added the server just created.

A machine is required because WebLogic starts the remote service by using nodemanager.

Set up the server on a remote machine, enable SSL, and disable host verification.

If the Weblogic workbench prompts restart, restart the service.

Keep the adminserver service and remote service started at the same time. Here, the service is a management server, not a managed server (this is what we want to test and start)

Run the command line to enter the $ wl_home // BEA/wlserver_10.3/common/bin directory.

Run wlst. Sh

Run the connect () command.

Follow the prompts to enter the remote user name, remote password, URL (managed server URL of the managed machine) http: // remote IP: managed server port

If nmenroll ('$ wl_home // wlserver_10.3/common/nodemanager') is successfully executed, the managed machine is successfully registered with the managed machine.

In the opposite direction, registration is completed from the managed machine to the competent machine.

Start the nodemanager for the managed machine and the nodemanager for the managed machine at startnodemanger. Sh under $ wl_home/wlserver_10.3/common/nodemanager respectively.

After the machine is started successfully, go to the server item of the Machine Management page and check that the remote machine is shutdown. Select Control to start the remote machine.