In fact, we can manually clean the fan and CPU heatsink dust ... In this way, it can greatly help our love machine to reduce the burden, restore the past Super performance working state.
First step: Remove the cover of the power switch.
Step two: Remove the screws that fix the keyboard and remove the keyboard line, removing the keyboard from the host.
Step three: Remove the screws labeled "D" at the bottom and back of the notebook.
The fourth step: Then remove the LCD screen, the LCD screen from the host to remove.
Step Sixth: Remove the Touchpad (palmrest).
1. Please remove the hard drive first, then remove the 2 screws underneath the hard drive slot.
2. Remove the screws at the bottom of the notebook to hold the palmrest.
3. Remove from the motherboard, touch pad connector, and then remove the entire palmrest (note: The upper and lower is occlusal clasp, need to be loosened according to the bite part.)
The palmrest and the bottom bite parts should be staggered and removed.
In addition, there is a connector between the BIOS battery and the motherboard, which should also be removed first.
The seventh step: we can mark the 1234 order by screws, remove the heat sink of the CPU.
We need to manually clean the dust in the heatsink slot if there is the best blown balloon. Small brushes are also available.
Eighth step: Take down, wireless card, Modem,cpu,pccard, microphone, horn, motherboard, we can remove the fan from the base.