Notebook Cleaning Dust Graphic tutorial

How does the notebook clean up the dust? When using a notebook computer, usually because the temperature is too high, resulting in automatic restart, crash, blue screen and other problems, the main reason is that the notebook cooling is not good. But the laptop heat is not good except for the design of the notebook itself, a very important reason is that the dust is too much of the notebook, seriously affecting the heat dissipation. So how do you clean up the dust? Small knitting here illustrated for everyone to explain notebook demolition cleaning steps.

Tools/raw Materials

Notebook computer

Notebook Open cap screwdriver, alcohol, small brush, gauze, hairdryer with cold air, CPU thermal silica gel and roller oil

Preparation before dismantling the machine

Preparation materials: Notebook Open cap screwdriver, alcohol, small brush, gauze, hairdryer with cold air, CPU thermal silica gel and roller oil.

Wash your hands first and release the static.

Make sure the notebook is turned off, the power is disconnected, and the notebook computer is removed first.

Core steps to clean up dust

Use a screwdriver to open the back of the laptop after the heatsink module screws apart, as long as the notebook to find the heat out of the tuyere location can find the direction of the CPU cooling module.

The notebook's heat pipe, heat fins, cooling fan and so on are removed and cleaned.

Pull out the power supply of the cooling fan 4PIN, then clean the dust after.

The core is the processor, with a tampon stained with alcohol to clean, you can clean off the original silicone, clean up and replace the new silicone.

Clean the cooling fan with a small brush, heat sink. Or get the faucet for cleaning. Then dry with cotton cloth, and then blow dry with a blow dryer, attention must be completely profession can be installed back.

After the above cleaning, the cooling module back seat also clean, you can restore.