Novice Tutorial: Telecom + Radio (or other carrier) dual WAN settings

Due to the existence of interconnection between different domestic carriersProblem, if you useUnicomThe line to visitTelecommunications sites then compare cards, and vice versa; so if the two WAN lines are not is the same operator, generally recommended user Dual Wan mode selected as " smart route ". After I test found in fact can use the following method to achieve telecommunications + broadcasting (or other operators) can also be bandwidth
WAN1 connect to telecommunications, WAN2 (or other carrier)

1. Disable WAN2 dns server: Select the DNS server of WAN2 as "use the following DNS server" and then in "preferred" and "standby" Enter 0.0.0.0
2 in the DNS server. Dual Wan mode set to smart routing
3. Add the following rules to the  

in the Rules, 3rd, 4 rules are The rules that must be added , and whether there are ports of the packets go out of the telecommunications line, and the 4th rule specifies that all default packets go load balanced. The
1th rule is Optional rules , if the user wants to access radio and television's IP segment from the radio and television lines out, 2nd is the user want to visit a video site broadcast from the radio and television line out. (IP segment and domain name are fictitious, for reference only)

tested, the user alone with WAN1 when Thunderbolt download speed stable around 1mb/s, and with the above settings after the speed of the Thunder download stable around 1.4mb/s

Novice Tutorial: Telecom + Radio (or other carrier) dual WAN settings