NRF52 series -- nRF52832 strikes, and nrf52nrf52832 strikes

NRF52 series -- nRF52832 strikes, and nrf52nrf52832 strikes
NRF52 series -- nRF52832 attack

With decades of development in wireless technology, Nordic has launched the first μblue chip, nRF8001. Its low power consumption and other features attracted the attention of countless manufacturers at that time, and applied this product to multiple fields. After that, it launched the ultra-low power wireless SoC nRF51 series, taking advantage of its high integration, performance, flexibility, and the ease of use of embedded protocol stack to develop wireless applications on the SoC, Bluetooth wireless applications are easy to use. In June 2015, Nordic launched its next-generation super-low-power wireless solution, the first product of the nRF52 series, nRF52832, the nRF52832 is equipped with a 64 MHz ARM Cortex-M4F processor, with a 512kB flash memory and 64kB RAM, On-Chip RF Balun, and added with NFC features, lower power consumption and higher performance.

 

Key features

• 2.4 GHz transceiver
  • -96 dBm sensitisponinBluetooth®Low energy mode
  • 1 Mbps, 2 Mbps supported data rates
  • TX Power-20 to + 4 dBm in 4 dB steps
  • Single pin antenna interface
  • 5.5 mA peak current in RX and TX (0 dBm)
  • (1 dB resolution)
• ARM®Cortex™-M4 32-bit processor with FPU, 64 MHz
  • 52 μA/MHz running from flash memory
  • 48 μA/MHz running from RAM
  • Data Watchpoint and Trace (DWT), Embedded Trace Macrocell (TM), and Instrumentation Trace Macro cell (ITM)
  • Serial Wire Debug (SWD)
  • Trace port
• Flexible Power Management
  • Supply voltage range 1.7 V to 3.6 V
  • Fully automatic drop-down and DC/DC regulator system
  • Fast wake-up using 64 MHz internal oscillator
  • 0.4 μA at 3 V in OFF mode
  • 0.7 μA at 3 V in OFF mode with 32 kB RAM retention
  • 1.9 μA at 3 V in ON mode, 32.768 kHz crystal oscillator and Real Time Counter running with 32 kB RAM retention
• Memory
  • 512 kB flash/64 kB RAM
• Nordic SoftDevice ready
• Support for concurrent multi-protocol
• Type 2 Near Field Communication (NFC-A) Tag with wakeup on field
• 12-bit, 200 ksps ADC-8 configurable channels with programmable gain
• 64-level comparator
• 15 level low power comparator with wakeup
• Temperature sensor
• 32 General Purpose I/O Pins
• 3x4 channel Pulse Width Modulator units with EasyDMA
• Digital microphone interface (PDM)
• 5x 32-bit timers with counter mode
• Up to 3x SPI Master/Slave with EasyDMA
• 2x I2C compatible 2-Wire Master/Slave
• UART (CTS/RTS) with EasyDMA
• Programmable Peripheral Interconnect (PPI)
• Quadrature Decoder (QDEC)
• Aes hw encryption with EasyDMA
• 3x Real Timer Counter (RTC)
• Package variants
  • QFN48 package, 6x6mm
  • WLCSP package, 3.0x3.2

 

Last few 52 Development Board photos