One-click Ghost USB Version Installation xp/win7 system

System installation methods have a variety of, one key Ghost USB version is one of the system installation method, also known as the U Disk System installation. Below the beans to detailed introduction under the use of a key ghost USB version of the system installation method.

First, Installation:

The so-called "USB drive", the software refers to all USB disks, including ordinary U disk, card reader + memory card, mobile hard disk and so on.

Installation steps:

1_ initialization (normally, the USB flash drive is ready to be initialized, this step can be skipped.)

Initialization is the use of USB stick chip manufacturers to provide production tools/user management tools, the U disk low-level lattice and other operations,
When a USB flash drive has serious problems, you can bring back the USB flash drive; the partition/formatting feature of the management tool improves the boot success rate.
Related downloads: http://doshome.com/soft/SoftList/Catalog_31_SoftTime_Desc_1.html
How to use: slightly (each USB stick chip is different, so the use of the tool is not the same, usually comes with a description.)

2_ Boot settings (version 2011 has changed compared to previous versions, please note reading)

Related files: 2_ boot settings. exe (that is, Bootice)
Specific steps: The following.

(1) Start Bootice

Bootice:↓↓↓

Computer softwareName: bootice>>> size:370KB | version:V1.3.2.2 ... | Category: System Tools | language: Chinese Application Platform:windows/mac OS x/linux

Insert USB drive, double-click "2_ boot setup. exe" to enter the Bootice main interface, under "Target Disk"
will automatically detect the local hard disk and USB drive, the general situation will automatically locate the first USB flash drive, if there is no automatic positioning
To your USB flash drive, please manually select the USB flash drive. There are 5 buttons below the main interface, select 4 Buttons "Partition Management".

(2) Repartitioning and Formatting (note: All data will be deleted from the USB flash drive, please do a backup of important files beforehand)

Scenario A: only for "Normal U Disk" or "card reader + memory card", not suitable for "mobile hard disk".

This example uses the "Netac U235 type 8G USB flash drive".

① Click the "Repartition" button

② "Startup Mode" select "USB-HDD mode (single partition)" ("Usb-zip mode" If you have an earlier USB flash drive or earlier computer that was produced before 2004)

③ Click "Next"

④ "File System" select "NTFS" (you can choose the default value "FAT32" If you do not consider storing large files such as Gho above 4G later)

⑤ "Volume label" must be entered "GHOST"

⑥ Click "OK"

Follow the instructions later, the program will automatically perform partitioning, formatting, allocation of the letter, etc., please close bootice, unplug the U disk.

Scenario B: only suitable for "removable hard disk", not for "normal USB flash Drive" or "card reader + memory card".
This example uses the "Hitachi 500G Mobile Hard Drive".
This example requires an additional download of the Diskgenius (hard disk Maintenance tool): http://www.diskgenius.cn,

Computer softwarename: diskgenius download >>> size:12.3MB | version:v4.6.2.1 ... | Category: System Tools | language: Chinese Application Platform:windows/mac OS x/linux

Unzip to any location on your hard drive and double-click to run Diskgenuis.exe to open the tool.

① Select "HD1:" (Mobile hard disk) this

② Click on the "Quick Partition" button to eject the "Quick Partition" window

③ "Number of Partitions" select "Custom" (default of 2 partitions)

④ 1th Partition of the file system is recommended to select "FAT32" to improve the boot success rate; Use the default value as much as possible (this example is 25GB); The volume label "must be changed to" GHOST ".

The 2nd partition uses the default NTFS to store large files larger than 4G, such as Gho, the capacity is automatically calculated, do not change, the label is arbitrary (the default value "Software" used in this example).

⑤ Click "OK"

Follow the instructions later, the program will automatically perform partitioning, formatting, allocation of the letter, etc., please close Diskgenius, unplug the mobile hard disk.

(3) Setting "Master Boot Record"

Re-insert USB drive, re-run bootice-> "Master boot Record"->ultraisousb-hdd+......-> installation/configuration->ultraiso usb-hdd+-> Prompt success Close Exit Bootice and unplug the USB flash drive.

(If you have an early USB flash drive or an earlier computer that was produced before 2004, choose "UltraISO usb-zip+ mode")

(4) Setting "Partition Boot Record"

Re-insert USB drive, re-run bootice-> "Partition Boot Record"->grub4dos......-> installation/configuration, default file name Grldr changed to gyldr-> OK.

Tip success, close exit Bootice, unplug the USB flash drive.

(5) Review: Re-insert the USB drive, rerun the "2_ boot setup. exe", again into the "Partition management" of "repartitioning", "Master Boot Record",

"Partition boot Record" to see if it is consistent with (2), (3), (4) selection, re-"Install/Set" if inconsistent.

(in general, this step can be skipped if self-confidence is not operated incorrectly)

Description: 1, non-first-time installation (including repair installation and upgrade installation), the above steps can be skipped.

2, if switch to "Super First aid disk" or other based on GRLDR system, only need to rename "Partition boot Record" Gyldr to Gcldr or other file name, the above other steps can be skipped.

3_ Setup program (this step is required)

The installation program is to automatically copy the necessary files such as Gyldr to the USB flash drive. Files such as ghost.img will be copied to the 1KG folder.

Related files: 3_ installation program. exe

How to use: similar to the usual method of installing software, just follow the instructions.

Second, the operation:

1, start the production of the USB drive (including the mobile hard disk)

Insert the USB flash drive before powering on or rebooting. There are two ways to start a method:

Method One: Boot list selection method. That is, press the "F12" key (Some computers press "ESC" key or "F10" key ...), the screen will display a list of drives.

Simply use the arrow keys to select a carriage return that starts with "USB:" to boot. (Some computers must choose the option to start with "HDD:" and then select the USB drive)

Supplement: Most computers produced after 2012 are no longer using the BIOS as firmware, but are using UEFI as firmware (but also provide compatibility options, see the instructions for hard disk edition), when using this method,

There is probably no USB option in the boot list, what to do? The solution is: power on by pressing the "Del" key (some computers are pressed "F1" or "F2", some computers press "FN+F2" ...) Go to Uefi,

First, choose USB Legacy Support, Devices-USB setup, as enabled, such as a.

Then, add the USB option from the alternate list below to the boot list above, such as B.

Figure a↑

Figure b↑

Method Two: The BIOS setting precedence method. Use this method if the above methods do not work. Power on by pressing "Del" key (some computers are pressed "F1" or "F2", some computers press "FN+F2" ...) Enter BIOS or UEFI,

① first, the arrow key ↓ Select "Integrated Peripherals" Enter, and then select "USB Devices Setting" carriage return, "USB massstorage Device Boot Setting" in a USB flash drive (such as),

Set to "HDD Mode" by the original "FDD mode" (floppy disk)

② Then, press ESC to return to the BIOS main screen and press the arrow key ↓ Select "Boot Configuration Features" or "Advanced biosfeatures" to enter,

Select "Hard Disk Drives" or "hard disk Boot priority" to enter, press the minus "-" key or plus "+" key to change the position of "1stDrive" and "2nd Drive", so that the USB stick will end up in the first boot (1st drives) Position (e.g. two).

③ finally Press "F10" key, select "OK" or "Y" Enter to save and exit the BIOS, the computer will automatically reboot will automatically boot from the USB stick.

Figure One ↑

Figure II ↑

2. Grub4dos Menu:

3. MS-DOS level menu:

4. MS-DOS level two menu:

Tips:

(1), in general, 2006-2012 production of computers, all support USB2.0 Fordos mode, if you often need ghost to recover from a USB flash drive ghost image,

Try using the 3rd "Usb-disk" mode first (see). The practice proves that if the computer supports this mode, ghost speed is fast (typically up to 2000mb/minutes).

(2), in the above case, if the USB stick is running slowly, there may be a BIOS setup error, please set the USB OperationMode this to Highspeed (high speed mode):

(3), if you do not recognize the USB disk or bad block error, you can only select the default option "Ide/sata".

5, depending on the situation (whether the C-disk image exists on the local hard disk) will automatically enter a different sub-window from the main window:

Case 1, Gho does not exist, the backup window appears

Case 2, there is a gho, the recovery window appears:

Description

Select Hard disk (the default option), and the backup or restore effect is the same as the hard disk version.

Select "USB flash drive" to backup or restore the C_pan.gho image that is pinned to the root of the first partition of the USB drive.

latest win7 gho image download:http://os.win7home.net/windows7/

Select "Move hard disk" to backup or restore the C_pan.gho image that is pinned to the root of the second partition of the "removable hard disk".

After selecting Backup or Restore, the Ghost window should appear:

tip: If you choose "USB stick" or "mobile hard disk" Ghost error or can not run, it is possible that the USB drive mode is incorrect, please switch between the MS-DOS level two menu 1th or 3rd, or the "USB flash drive" or "mobile hard disk" The first partition of the volume label is not set to " GHOST. "

A key ghost USB version of the use of the introduction here, more understanding of some system installation method is always good, the system will inevitably encounter various reasons and can not be started or installed, then this is a very good system installation options.

One-click Ghost USB Version Installation xp/win7 system