One-click installation and running of ghost Hard Disk

1. installation:

1. confirm that your first hard disk is an IDE or SATA hard disk.

Note: If you are using a SATA serial hard drive, you do not need to set bios. If you cannot run ghost,
Set the BIOS to compatible (compatible mode) and IDE (ATA mode), for example:

2. Download
-> Unzip-> double-click "one-click ghosthard disk .exe"

3. Click "Next" until you finally click "finish ".

Ii. Run:

Method 1: Run in Windows

"Run" or "start-> Program-> one-click ghost" after installation"

Depending on the situation (whether the C disk image exists), different options are automatically located:

Case 1. If gho does not exist, it is automatically located on the "backup" option

Case 2. If gho exists, it is automatically located on the "recovery" option.

Method 2: run the boot menu

1. Windows Startup Menu:

2. grub4dos menu:

3, MS-DOS level menu:

4, MS-DOS Level 2 menu:

Depending on the situation (whether the C disk image exists), different warning windows are automatically displayed from the main window:

Case 1. If gho does not exist, the "backup" window appears.

Case 2. If gho exists, the "Restore" window appears:

Method 3: Press K to start the instance (new feature in version 08)

It is not supported by default. You need to click "Settings"> "Boot"> "hotkey mode"

The "Press K to start..." prompt appears every time you start the system. You only need to press the Hot Key (K key) Within 4 seconds to enter

Three additional menus will be automatically skipped during startup to go directly to the one-click Backup or one-click recovery warning dialog box (automatically executed 10 seconds later)

The ghost window appears, and the progress bar moves at. Successfully waving ^_^ to you

Method 4: If none of the above three methods can be run, use the same version of the optical disk or USB disk.

3. Set options:
(Note: Normally, you do not need to perform the following operations. cainiao stops)

Start-> Program-> one-click ghost-> set

1. Set the logon Password

2. Set the Boot Mode

3. Set the memory mode

4. Set hard disk Mode

5. Set the CD mode.

6. Set the speed mode.

7. Set the ghost version

8. Set the compression mode (For details, refer to "Optical Disk version: advanced burning method ")

9. Set the volume size (For details, refer to "Optical Disk version: advanced burning method ")

10. Set ghost Parameters

11. Set the Boot Mode (see "Run: method 3" above ")

12. Set the shutdown mode.

13. Set expert business cards

4. Other functions:

(1) images-> open, protect, manage, import, export, move, and delete

Because the one-click image (c_pan.gho) is specially protected, direct operations on itself in the resource manager are not allowed,
However, for the convenience of image management by senior users or administrators, a special menu is provided:
1. Open: if the default image exists, use ghostexp to open it for editing gho, such as adding, deleting, and extracting files in GHO.
2. Protection: Remove or add the anti-delete attribute (valid only when the last partition is NTFS). For example, click "yes" to permanently remove the protection, so that you can directly "manage" it ". (For administrator only)
3. Management: perform direct operations on the default GHO in the resource manager, such as manual import, export, move, or delete operations. (For administrator only)
4. Import: copy or move external gho ~ 1 folder, which is generally used to install the system without burning. For example, copy the downloaded general-purpose gho or other computers of the same type ~ 1 (the file name must be changed to c_pan.gho ).
5. Export: copy one-click images (saved separately) to other locations. For example, copy the gho of the local computer to a USB flash drive or other mobile devices for "import" of other computers of the same type, to achieve the purpose of sharing.
6. Move: move one-click images to other places. For example, if you do not want to overwrite the original gho during another one-click Backup, you can move the previous gho to another location.
7. Delete: delete an image with one click, which is not commonly used.

(2) repair:

(3) diagnosis report:

If you encounter any problems, you can go to the Forum for help. Note the following when posting: Fault symptom must be described in detail (on-screen prompt ),
In the form of an attachment, a one-click ghostdiagnostic report .txt "is provided to help you analyze the cause and solve the problem. It is also conducive to the future improvement of the software.