One-click installation and running of the ghost Optical Disk

One-click installation and running of the ghost Optical Disk
Install and run the one-click ghost Optical Disk 


I. Burning:

1. Prepare a blank disc and write the software name and version number on the disc with an oily recording pen to prevent confusion with other discs for a long time.





2. Download and decompress the package. Note: if the default program is WINRAR, do not double-click to open the file "one-click ghost. ISO ",
The correct method is: Use Nero or UltraISO 9.6 or later to open "one-click ghost optical disk version. ISO ",


(1) Basic burning method (without integrating the GHO image): Taking UltraISO as an example:

The so-called "do not integrate the GHO image" means simply burning the one-key ghost optical disk version. ISO, which can achieve one-key recovery system (from the hard disk) and other functions,
You cannot restore the system (from a CD) with one click. Because it occupies a small amount of space (about 10 MB), you can use one CD (if you are afraid of wasting space, you can add other files. We recommend that you use UltraISO for editing ).

1. Put the blank CD-R disc into the optical drive (recorder), run UltraISO-> file-> open-> Find "one-click ghost disc version. iso"-> open.
2. Click the "burn" icon on the toolbar.
3. Adjust the "write speed" after the "burn a CD image" window appears ", to ensure the success rate of burning, change "maximum" to moderate speed (for example, 20 X can be changed to 10X), and click "burn ...... Wait until the burning ends.





(2) advanced burning method (integrated with the GHO image ):

The so-called "Integrated GHO image" means to burn the GHOST image stored on the hard disk to a CD or a blank DVD disk.
One-click ghost provides a more secure recovery solution for one-click Recovery System (from a CD) features (such.
Because the space used by the system partition varies with the computer, the size of the generated image is different. Therefore, more than one CD or DVD is required.





You must follow the steps below to burn the image (for example, burn the one-click Backup image of the XP system in the system partition (drive C) to a blank CD ):

1. Preparation: in WINDOWS, run the one-click ghost hard disk version-> Settings-> compression and volume splitting







One-click Backup of drive C (if you do not want to overwrite the original image, first export or move the old image to another location)



After the backup is complete, restart WINDOWS, and click ghost-> Manage. Three files are found: C_PAN.GHO (650 MB), C_PAN001.GHS (642 MB), and C_PAN.TXT. We only need the first two files.
Calculate: The used space on my drive C is 3.4 GB (page file pagefile. sys occupies 800 MB ),
High compression formula: (Capacity of disk C-page file) × 50% = C_PAN *. * sum = total capacity required for the disc
My situation is: (3.4G-0.8G) x 50% = 650 MB + 642 MB = 1.3G,
Okay, that's right. If I use two CD discs, I just need one. If I have only one DVD, I can add more than 3G files!
(Note: The total capacity of the CD should contain all files in the first CD's one-key ghost program, that is, EZBOOT. It is negligible because it only occupies 10 MB)

2. Burn 1st CDs or DVDs:

① Double-click or open "one-click ghost optical disk. ISO" in UltraISO"
(If you want to burn a DVD, click "file-> properties-> media-> select 4.7 GB ",)




② Use one-click ghost-> Manage (open the image folder)
③ Add (drag) C_PAN.GHO to ghost. ISO with one click (if it is a DVD disc, C_PAN001.GHS will be added together)
④ Click the "burn" icon



⑤ Adjust the "write speed". To ensure the success rate of burning, change the "maximum" to a moderate speed (for example, the maximum value is 20X and can be changed to 10X), and click the "burn" button ...... Wait until the burning ends.



6. Save the disk, for example, named GHOST_1.ISO. Pop up the CD, and mark it with a pen on the CD for distinction.

3. Burn 2nd CDS: the steps are basically the same as those for burning 1st CDs. Only ①, ③, and ⑥ are different:

① Open UltraISO or create
② Use one-click ghost-> Manage (open the image folder)
③ Add C_PAN001.GHS to the new empty ISO.
④ Click the "burn" icon
⑤ Click "burn... Wait until the burning ends.
6. Save the disk, for example, named GHOST_2.ISO. Pop up the disc and mark it with a pen on the disc for distinction.

Note: If you need 3rd or 4th images... Follow the procedure of burning 2nd sheets,
The basic method in step 3: Add C_PAN ??? in CD ???. GHS. If multiple C_PAN ???. It is recommended that the total capacity of GHS not exceed 4 GB, otherwise errors may occur.
(Note: add files in ascending order by file name ).


Ii. Run:

1. Start this disc.
Put the disc into the optical drive before it is turned on or restarted. There are two startup methods:

Method 1: select the power-on list. Press the "F12" Key (a few computers press the "ESC" key or "F10" Key...) at startup, and a drive list is displayed ,.
You only need to use the arrow keys to select the item starting with "CD/DVD:" And press enter to guide.




Method 2: BIOS priority setting. If the preceding method does not work, use this method. Press "Del" (some computers press "F2" or "F1") to enter the BIOS, press "Boot Configuration Features" and press "Boot Configuration Features" to enter the BIOS,
Select "Boot Device Priority" and press the minus sign "-" or the plus sign "+" to change the startup sequence of each Drive, so that the Drive will eventually be on the first Drive Device (1st Drive Device).
Press the "F10" Key, select "OK" or "Y", and press enter to save and exit the BIOS. The computer will automatically restart and boot from the optical drive.




2. CD boot menu:



3, MS-DOS level menu:



4, MS-DOS Level 2 menu:



5. Select the image file source:

 

Note:
From "Hard Disk" is the default choice, and the Restoration effect is the same as that of hard disk.
The "cd" indicates restoring the c_pan.gho image under the root directory of the CD. For more information, see the "advanced burning method"
If the preceding operation fails, use manual GHOST.

6. If you select from "Hard Disk", different sub-windows will be automatically entered from the main window according to different situations (whether the C disk image exists:

Case 1. If this parameter does not exist, the "backup" window appears.



Case 2. If yes, the "Restore" window appears:



After "backup" or "Restore" is selected, the GHOST window appears: