One minute AP

1. log on to the Wireless AP
The default IP address of a Wireless AP is 192.168.1.1 by default. The default user name and password are both admin and the network administrator usually configures a Wireless AP through the web interface. The method is as follows:
Connect the LAN port of the Wireless AP to the host, and change the IP address of the host and the Wireless AP to the same network segment. Open the host IE browser and enter http: // 192.168.1.1 in the address bar to log on to the configuration page.
2. Change the default settings
1) Change the IP address of a Wireless AP Based on the IP address of its network segment. For example, if the LAN address is 192.168.1.0/24, change the address of the Wireless AP to an unallocated address in the network segment ., Set the Intranet IP address of the Wireless AP to 192.168.1.2/24.

Modify LAN port configuration

2) it is not safe to use the default password. Anyone with some network knowledge will know the default logon password. Once a non-administrator of the network obtains the management permission through the default password, the consequences are unimaginable. Therefore, before connecting a Wireless AP to the network, it is necessary to change the default user name and password ., Enter the original user name and password "admin" to enter the new user name and password.
Login Wireless AP
Default logon http: // 192.168.1.1 Configuration
Username: Admin, password: Admin
Change Default Configuration

1. During wireless network settings, the setting of the SSID (Service Set Identifier, service set identifier) is often easy to ignore, some network administrators think that changing the SSID does not have much to do with whether the client can access the wireless network. However, if not only this Wireless AP device is nearby, it is particularly important to modify these parameters. Therefore, you need to clarify the meaning of the SSID.

The SSID can be easily identified by the WLAN name. If multiple APS of the same manufacturer exist in the same region, their SSID is the same by default, and the client may connect to other APs, it brings great inconvenience to wireless network communication. In addition, do not use personal sensitive information when modifying the default SSID.
2. Shield SSID Broadcast
After the SSID broadcast is blocked, the wireless network can still be used normally. However, when the client searches for the wireless network, it cannot find the network identifier-SSID number. Therefore, to connect the client to the network, you must manually enter the SSID. Although the efficiency of the wireless network will be affected after the SSID broadcast is blocked, the network security is greatly improved.
3. Enable Security Settings
The TP-link device only supports the WEP (Wireless Equivalent Privacy) encryption technology. The technology provides two key formats: hexadecimal and ASCII code. Each format supports different key lengths. Select a proper length and enter the key content.

One minute AP