One of Windows Server Rookie treasure: Windows Server R2 Ad Server Setup

Source: Internet
Author: User
Tags ad server to domain

1. For a server that will be installed as a DC, its system configuration and basic disk planning are not described here, but critical network connection properties must be noted. You can configure its IP properties by opening the properties of the local area connection. As the IP address of the server DC must be a static IP address, although you do not necessarily need to configure the default gateway, but the DNS server points to be configured correctly, because the work of ad is closely dependent on the DNS service. In this example, the entire Microsoft network environment is self-made, considering that the first DC as a DNS server in the corporate network, it is necessary to configure its preferred DNS server address as the IP address of this computer.
2. Since the WIN08R2 default firewall configuration is filtered based on the type of connection network, it is a good idea to change the public network whose network type is recognized by default to private network through network and Sharing Center.
3. Of course, in addition, the current NetBIOS name of the computer, that is, the computer needs to be set up, because after the DC installation, it is not advisable to modify the operation. 1.1th means that before upgrading to domain control, the machine's IP, DNS, wins and other configuration is correct, if static, do not let the machine automatically get.
2.2nd means to choose a different network type, its firewall open port is not the same, public network firewall to consider security issues, open a few ports, more restrictions, so it is best to choose a private network.
3. Before upgrading to domain control, computer name to determine down, up to domain control, and then change the computer name can be unpredictable problems, so it is best to upgrade to domain control before the computer name is determined, and then do not change.
one of Windows Server Rookie treasure: Windows Server R2 Ad Server Setup

I. Introduction to Windows AD

http://technet.microsoft.com/zh-cn/library/cc758535 (ws.10). aspx

Second, Windows server R2 AD Build a detailed plot

1, first prepare a Windows Server R2 computer, this service is to do domain controller, if it is the actual production environment, the recommended configuration is slightly higher, the test environment to meet the minimum requirements of Windows R2 is good, note that the Windows R2 only 64-bit version, your old machine to support the minimum 64-bit, ok! Stop stalling, and quickly start our ad set up a feast;
2, the installation process diagram:
(1) Check the version of the system, start running, Cmd,systeminfo, you can see the information (this step seems to feel very redundant)

(2) Run with Administrator privileges, Dcpromo (legendary powerful dcpromo Ah!) :(mars_13): mars_13): "/>)

(3) Wait a moment, you will see the following interface, which has a "Use Advanced mode installation" here as a newly-introduced side dishes can not move, and so the study a little bit deeper after the try to come! (If you must come for a moment, do not oppose it)

(4) After clicking on the next step, there will be a frightening warning, vegetable dishes do not worry, do not fear, here is harmless, just a small episode before the beginning, you can completely ignore! Of course, it is recommended that you can understand the source of the warning here, want to know the children's shoes can go into the interface recommended in the Microsoft KB page to see what.

(5) After the next step, we start to build the ad configuration phase, here you need to note that if you are the first to build your entire intranet is the first domain controller, then be sure to select the second item "new domain in the New Forest", The above item is used when there is an ad environment in your intranet and you want to build an additional domain controller.

(6) After the next, the configuration name your domain name, this should be cautious, because this configuration after the change is very cumbersome, and the risk of domain renaming is not generally large;

(7) After the next step, configure the functional level of your domain, children's shoes attention, it is important to note that if your ad in the future may appear in the Server 2003 system domain controller, be sure to select the domain functional level of 2003, or you later those server 2003 of the server can not do the domain controller, insurance, when the first DC installed, all choose a lower bar, the future to upgrade to 2008 of the domain functional level is no problem, but selected 2008 of the functional level, later to downgrade is difficult!

(8) After setting the domain functional level is your ad in the more important DNS server installation, by default is recommended DC and DNS installed on a server, DNS does not account for what resources, you do not have to worry about it consumes your server resources, With DC installed together can also facilitate the subsequent maintenance and data synchronization and backup, highly recommended! In this step, the children's shoes must check the configuration of their servers, the server's DNS is pointing to their own, this is very important, or your DNS installation will be problematic.


(9) Click on the next step, will pop up a very scary warning, you still ignore it, point is! This is actually a matter of Windows Server, forget it! To study this warning of children's shoes, you can go to Microsoft TechNet Search, there is not much to say

(10) Over the DNS alarm flaming, we will start the end of the next configuration, the ad database file with the log file, Microsoft installation Interface said the recommended installation in different locations, is simply nonsense, children's shoes This position do not change, all kinds of tests and the wrong find, All of Microsoft's configuration here is by default, you change the system with other systems when it is easy to make mistakes (this is true)

(11) By default the next step is your old man to remember a password "domain restore password", this password is very important, follow-up database migration, backup, collation, recovery can be used, do not casually engage in a

(12) After the next step is to check the configuration information of your entire DC, you can export to a location to keep up, for subsequent error check, but also as a DC installation of the unattended installation of the script (AD unattended installation here does not say, interested children shoes can go to find some relevant information to learn , the application is not very extensive)

(13) After the next step is a few minutes waiting for you to be done

(14) After you have finished, restart the machine, your ad has been formally built successfully!


recent scoring records of this post

One of Windows Server Rookie treasure: Windows Server R2 Ad Server Setup

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.