Online Network Monitoring Interface Box

The Online Network Monitoring Interface Box of fluke network can maximize the perspective of the Full Duplex switching LAN and WAN network, and minimize the link failure time.

Provides single-port or multi-port configurations. The Online Network Monitoring Interface Box can access all network traffic, including physical errors, in both directions of the full-duplex link. They are fault tolerant and support dynamic insertion of Network Monitoring and Analysis devices into LAN and wide area networks without disconnecting links. The Online Network Monitoring Interface Box completely passively accesses network traffic. It can roam between network segments to analyze a single network segment. In addition, eight optical taps can be linked together to provide remote roaming for up to 16 network segments.

The Network Monitoring Interface Box can be used with OptiView link analyzer, OptiView Wan analyzer, or third-party LAN and Security Analyzer. The Network Monitoring Interface Box provides an economical and unique way for analyzer and probe to view all traffic on one or more previous "blind" links. The Online Network Monitoring Interface Box can monitor, capture, and analyze physical errors, enabling full duplex, full-line speed performance, or even a gigabit rate, which cannot be achieved by mirror ports.

Overview

• You can dynamically insert devices for network monitoring and analysis without disconnecting the link.
• It does not interfere with the frame arrival time or cause incomplete frame statistics, and provides a comprehensive network perspective.
• Full access to network traffic at an online Rate
• Access the network in an invisible and non-interfering manner
• Provides the "port image" function for network analysis.
• Does not increase the burden on the vswitch
• Allows monitoring, capturing, and analyzing physical errors

Features

• Multi-port Online Network Monitoring Interface Box
  Full-duplex multi-port Ethernet Network Monitoring Interface Box
  Access multiple CIDR blocks
  Connect fluke network's RJ-45 12-port Online Network Monitoring Interface Box TAP-12P) or 8-port online Optical Network Monitoring Interface Box FTAP-8M or FTAP-8S) to multiple key switching links, provides an analyzer, security device, or probe to access multiple full-duplex CIDR blocks.
  
  When you connect to the TAP port dedicated to the OptiView link analyzer, you can use advanced OptiView protocol analysis expert software to control multiple TAP ports on the network.
• Single-port Online Network Monitoring Interface Box
  
  View your network in a simple and economical way
  Fluke network's single-port Online Network Monitoring Interface Box provides you with an economical way to fully view your network. These non-plug-ins can be used in a 10/100/1000 Mbps copper network and a single-mode or multi-mode optical fiber network.
  

• 
  Technical Indicators

  Technical Indicators

  UTP Tap-1

  Fiber FTAP-10x

  UTP Tap-12

  Fiber FTAP-8

  Tap-1G

  Network Interface/Media

  1 RJ-45 wire pair

  Two duplex SC Connector

  12 RJ45 cable Pairs

  16 duplex SC Connector

  1 RJ 45 wire to 1000Base-T)

  Response time

  Less than 1 Bit @ 100 Mbps

  0

  Less than 1 Bit @ 100 Mbps

  Less than 1 Bit

  Power

  1.5 million

  N/

  18 W

  18 W

  5 W

  Height

  2.8

  3.05

  4.4

  1U

  2.8

  Width

  10.4

  12.7

  43.2

  43.2

  10.4

  Weight

  156 GB

  235 GB

  13.6 kg

  4.5 kg

  453 GB

  Install

  48.3

  48.3 *

  48.3 **

  48.3 **

  48.3 *

  Operating Temperature

  0-40 degrees Celsius

  0-40 degrees Celsius

  0-40 degrees Celsius

  0-40 degrees Celsius

  0-40 degrees Celsius

  * Ready-to-use tools

  ** Includes fixed rack tools

  
  Order Information
  

  	Online Network Monitoring Interface Box Model Description TAP-1P Single Port copper Monitoring Interface Box, 10/100 Mbps Ethernet, RJ-45 TAP-12 12 port copper Monitoring Interface Box, 10/100 Mbps Ethernet, RJ-45 FTAP-8M 8-port Optical Cable Monitoring Interface Box, multi-mode, SC Interface FTAP-8S 8-port Optical Cable Monitoring Interface Box, single-mode, SC Interface FTAP-101 Single-port Optical Cable Monitoring Interface Box, multimode, SC Interface FTAP-102 Single-port Optical Cable Monitoring Interface Box, single-mode, SC Interface FTAP-003 Three single-port Optical Cable Monitoring Interface Box rack mounting kits FTAP-012 12 rack mounting kits for single-port Optical Cable Monitoring Interface boxes