The NODEMCU is a compact development board with integrated WiFi and MCU, based on the ESP8266 chip. Forum in http://bbs.nodemcu.com/, source code in HTTPS://GITHUB.COM/NODEMCU.
Using the Openscad to make a shell, you can use the 3D printer output, and no longer "bare-Ben".
OPENSCAD's original model file is as follows, which can be modified and output on the 3D printer itself.
NODEMCU Smart Device, box, Rainproof (vertical mount)//author:[email protected],//copyright 2015-2025.//pay attention to the scale changes when printing, and rotate upward. Avoid the collapse of the upper print without support. The lid is printed individually, or placed as two models. Constant definition athick=0.5;//cover thickness bthick=0.10;//box wall thickness bwidth=4.0;//inner diameter net width bhight=1.5;//inner diameter net high blong_inter=5.5;//inner diameter net length/ Od length = bottom thickness + Inner diameter + stopper + cover thickness blong=bthick+blong_inter+bthick+athick;//text or icon identification//translate ([ -2,0,0])//scale ([1, 1, 0.1])// surface (file = "Smiley.png", center = true);//============== ========================//box body, using knockout cutting style modeling. Difference () {//outer box translate ([0,0,0]) {color ([0.8,0.8,0.8]) cube ([blong,bwidth+bthick*2,bhight+bthick*2]);} Inner box, hollowed out. Translate ([Bthick,bthick,bthick]) {color ([0.2,0.8,0.8]) cube ([Blong+1,bwidth,bhight]);} Bottom, sunken logo, can be labeled. Translate ([blong-2,1.8,bhight+bthick+0.08]) {color ([0.6,0.6,0.6]) cube ([1.5,bwidth*0.5,0.1]);}} The bottom is reinforced and a corner stop is formed inside. Translate ([Bthick,bthick,bthick]) {color ([0.2,0.5,0.2]) cube ([Bthick,bwidth,bthick]);} Translate ([bthick,bthick,bhight]) {color ([0.2,0.5,0.2]) cube ([Bthick,bwidth,bthick]);} Translate ([bThick,bthick,bthick]) {color ([0.2,0.5,0.2]) cube ([Bthick,bthick,bhight]);} Translate ([Bthick,bwidth,bthick]) {color ([0.2,0.5,0.2]) cube ([Bthick,bthick,bhight]);} Lid stopper. Translate ([Blong-athick,bthick,bthick]) {color ([0.2,0.5,0.2]) cube ([Bthick,bwidth,bthick]);} Translate ([blong-athick,bthick,bhight]) {color ([0.2,0.5,0.2]) cube ([Bthick,bwidth,bthick]);} ======================================//lid, individually printed. Embed the inside of the box, keeping the tolerances in mind. Translate ([5.75,0.0,0]) {//translate ([0,0,2]) {difference () {//cover, knockout. Translate ([0,bthick,bthick]) {color ([0.5,0.5,0.5]) cube ([Athick-0.05,bwidth,bhight]);} Translate ([0.2,bthick*2,bthick*2]) {color ([0.6,0.3,0.8]) cube ([athick+1,bwidth-bthick*2,bhight-bthick*2]);} Vents, hollowed out. ================//left outlet translate ([ -0.1,0.5,0.4]) {color ([1,0.8,0.8]) cube ([0.8,0.3,0.9]);} Translate ([ -0.1,1,0.4]) {color ([1,0.8,0.8]) cube ([0.8,0.3,0.9]);} Right air inlet translate ([ -0.1,3,0.4]) {color ([1,0.8,0.8]) cube ([0.8,0.3,0.9]);} Translate ([ -0.1,3.5,0.4]) {color ([1,0.8,0.8]) cube ([0.8,0.3,0.9]);} USB interface, knockout. Translate ([ -0.1,1.75,1.0]) {Color ([1,0.8,0.8]) cube ([0.8,0.8,0.3]);}}
Openscad Design 3D Print NODEMCU housing