Optimal Scheme for extending the WDS function of a wireless router

From the perspective of the WDS function of the wireless router, the wireless distributed system is a system with multiple access points. The following is a good solution for wireless broadband access. If you select a good signal, you can get a good network transmission effect.

Optimal Scheme for extending the WDS function of a wireless router

Wireless Distribution System (WDS): a distributed Wireless System that connects multiple Wireless access points in the IEEE 802.11 Network. It allows the wireless network to be expanded through multiple access points, rather than the previous wireless access points to be connected through wired connections. This scalability enables wireless networks to have greater transmission distance and coverage. WDS is implemented through the wireless network bridging function on the TP-LINK wireless router.

While wireless networks have become the best solution for broadband access to home networks, the environment seriously degrades wireless signals because the houses are basically Reinforced Concrete Structures and the structure is complex and diverse. Therefore, when a Wireless AP is used for wireless network coverage, there may be poor signals, data transmission rates cannot meet user requirements, and even blind spots. In order to increase the coverage of the wireless network and the wireless transmission rate at a long distance, the wireless router WDS function of our wireless router is required for surfing the internet conveniently and quickly.

For example, B, C, and D who live in the same building want to access the Internet through the ADSL Broadband of home A, but B, C, and D have better signals in some areas, what if the signal in other regions is weak or cannot be found at all? In B, C, D home to add a TP-LINK wireless router, through the wireless bridge function can achieve the perfect coverage of the entire area, eliminate blind spots. Wireless coverage can also be achieved in environments such as multiple office floors, residential quarters, and complex families.

Wireless Router WDS function Configuration Guide:

◆ The wireless routers in household A, B, C, and D are marked as wireless router A, wireless router B, wireless router C, and wireless router D in turn.

◆ In IP address 192.168.1.X, the range of X is any number between 2 and 254, but the last IP address of all computers and wireless routers cannot be the same.

◆ Configure the IP address and other parameters for connecting to the computer as IP: 192.168.1.X mask: 255.255.255.0 Gateway: 192.168.1.1 DNS: consulting service provider ];

◆ Configure wireless router.

◆ Enable the Bridge function of "Wireless Parameters", write the MAC addresses of wireless routers B, C, and D, and view the MAC addresses on the backboard labels of the device), and modify the SSID and frequency band as needed.

◆ Set wireless router A to access the Internet at the network parameter-WAN port settings.

◆ Configure wireless routers B, C, and D.

The WDS function of the wireless router disables the DHCP server;

◆ Change the IP address of the LAN port to 192.168.1.X );

◆ Enable the Bridge function of "Wireless Parameters", write the MAC address of wireless router A, modify the SSID, and adjust the frequency band to be consistent with that of wireless router;

◆ Complete the settings.

◆ Place the wireless routers A, B, C, and D in the specified position. Note that the position of B, C, and D should be able to better search for the signal of;

◆ Connect your computer to the wireless router wirelessly to achieve wireless Internet sharing.