Optimized vmwawre and vmwawre configurations

Optimized vmwawre and vmwawre configurations

If the vmwarevm is improperly set, the running speed may be slow, the running of the host may be affected, or even the host may crash.

The following is an improvementVmwarevmSeveral tips on running speed,

Article from: http://blog.csdn.net/shanzhizi

1. Modify the options (global settings) in preference a to enter the setting interface.

As shown in:

B. Modify the VM memory usage (key)

This step is also one of the key steps. Otherwise, the speed of the virtual machine will be significantly reduced due to hard disk reading (and the hard disk calling is the main reason for the slow speed of the virtual machine ). Selected

"Fit all virtual machinememory into reserved host RAM ".

As shown inVirtual MachineIt only uses physical memory and does not read the hard disk. Of course, make sure that the physical memory of the host has enough space for the Virtual Machine to use. Otherwise, competition will occur.

C. Set the Input grabbed in priority to high.
2. Set a for a single virtual machine to enter the setting interface as follows:

 

B memory settings

The memory setting principle is: the sum of the maximum memory used by all virtual machines cannot exceed the free memory of the host system (Real System). For example, the host memory here is 2 GB, windows 7 consumes more than 400 mb of free space, and some running software accounts for more than 1 GB. If you only run one XP Virtual Machine, allocating MB of memory can basically ensure that the virtual machine will not compete with the host machine for memory usage. Http://blog.csdn.net/shanzhizi

C virtual machine advanced option settings

Here we will mainly set the two areas in:

Inputgrabbed (same as above): Set it to high or normal. Here I set it to high.

Disablememory page trimming? Reading the hard disk is the main cause of the VM's slowness.