OSPF essence 5 class LSA and RIP integrated experiment

R1 configuration: First configure each interface IP address and add a loopback port

r1>en

R1#conf T

R1 (config) #inter fa0/0

R1 (config-if) #ip address 202.106.12.1 255.255.255.0

R1 (config-if) #no shut

R1 (config-if) #int Loop 0

R1 (config-if) #ip Add 1.1.1.1 255.255.255.255

R1 (config-if) #no shut

R1 (config) #router RIP configuration RIP Dynamic routing protocol measure is a hop number and save

R1 (config-router) #v 2

R1 (config-router) #no auto-summary

R1 (config-router) #net 0.0.0.0

R1 (Config-router) #end

R1 (config) #ip Route 0.0.0.0 0.0.0.0 202.106.12.2

R1#write

Building configuration ...

[OK]