Lab requirements:
1. Basic configuration;
2. OSPF multi-region configuration;
3. configuration of OSPF Special Areas (stub, totally stub, NSSA, totally NSSA );
4. Route re-publishing;
5. frame-relay configuration;
6. Configure OSPF in the frame-relay network;
7. OSPF Authentication configuration (interface, region, and virtual link );
8. Verify the OSPF network type (broadcast, NBMA, P2P, P2MP, P2MP NBMA, and loopback ).
Topology description:
R1: f0/0 --------- R2: f0/0 area 0
R1: f0/1 --------- R3: f0/0 area 0
R2: f0/1 --------- R3: f0/1 area 0
R1: f1/0 --------- R4: f0/0 area 2 stub
R2: f1/0 --------- R5: f0/0 area 3 Totally stub
R3: f1/0 --------- R6: f0/0 area 4 NSSA | Totally NSSA
R6: s0/0 --------- R7: s0/0 AS2 RIP
R1: s0/0 --------- R8: s0/0
R8: s0/1 --------- R10: s0/0
R8: f1/0 --------- R9: f1/0
R9: s0/0 --------- R11: s0/0
IP Address Allocation:
R1 ----- R2 12.1.1.0/24
R1 ----- R3 13.1.1.0/24
R1 ----- R4 14.1.1.0/24
R2 ----- R3 23.1.1.0/24
R2 ----- R5 25.1.1.0/24
R3 ----- R6 36.1.1.0/24
R6 ----- R7 67.1.1.0/24
R8 ----- R9 89.1.1.0/24
Frame-relay cloud: 110.1.1.0/24
The attachment is the configuration file of the experiment. Because the experiment is memory-consuming, I have not completed all the items. update them step by step.
Author: "wesleyou technical blog"