Overview of ADSL dial-up or fiber optic Internet settings (original)

Whether in Wuzhou set up optical fiber or in the Taiping set up ADSL dial-up internet every time you set up the Internet all the time is encountered various troubles ... This time again to get n long, each problem is different. Summary of the operation process, easy to later encounter problems back to query from a microblog.
Setting up dial-up internet for telephone lines:
1, the voice separator points over the line access all-in-one machine, and then set, if the ADSL light is often illuminated, in setting automatic search Vpi/vci value, if Vpi/vci value automatic search failure, Baidu own city Vpi/vci value, Wuzhou Vpi/vci value is: 0/35 ( vpi:0, vci:35).
2, if the ADSL lamp flashing, has not become a constant light, the front-end speech separator first unplug, directly connect the phone line, and then set the router, if the ADSL light is often light is the voice separator points to the network of the root line has a problem, or the voice separator itself or its interface has problems. I just changed a good line to be normal.
3, if the pull is telecommunications, unable to enter the 192.168.1.1 Setup page of the machine, try to dial 10,000th to query your DNS server, and then try to manually enter the IP and DNS server for the telecommunications, you can connect.

Second, set up optical fiber Internet:
Fiber pull in when the telecommunications will automatically help to pull home, and then set up a good light cat, Wuzhou House has a lot of households, are brought to rent, this involves cabling scheme, I pull is 10M intercity fiber, dollars households enough. Because the number of households is small, so there is no one like the CBD of any office of the complex to the egg drop of the scheme.
1, from the light cat pull a cable to access a 48-port switch (do not buy much good, do not need to support VLAN or whether stackable, a total of dollars households).
2, from the switch wiring to each household, both ends of the test normal and then on the switch this end of the mark on the room number.
3. In this local area network, My light cat's IP is 192.168.1.1 (see its bottom is written), in order to facilitate management, also do not let each other due to IP conflict, the best place to set a fixed IP,IP address is 192.168.1.XX (room number), the mask is 255.255.255, the default gateway fills the light Cat IP, here is the 192.168.1.1,dns server is also filled with light cat ip:192.168.1.1, set up a fixed IP, and distinguish the router's DHCP range, so there will be no IP conflict.
4, there is a easiest way, directly through the 192.168.1.1 into the Light Cat set page account number: telecomadmin, Password: ne7ja%5m, go directly to the IP of the network segment, changed to 192.168.x.1, so that the whole building is not set up.

Here will be the main setup process, other settings details, such as access to the settings page of those details, basically Baidu are found, here no longer repeat, I just put my own actually encountered problems to write, for the needs of friends reference, these are my own groping out of, I am not the first person to meet these problems, certainly not the last one to encounter these problems, so feel more meaningful, just sort out a release.

This article helped me clear the basic idea, so be sure to send a link: Description of various router functions: http://service.tp-link.com.cn/detail_article_192.html

Overview of ADSL dial-up or fiber optic Internet settings (original)