PCB inspection matters, create drill table

PCB Inspection Matters

Check that the device is all finished,

Check that the cables are all finished,

Check dangling Line,via,

See if the copper skin is isolated and has no network copper skin,

Check the DRC,

1. Select the menu display-status to see if the marker is at 0%

2. Execute Tool-quick report-unplaced Component report.

3. Execute Tool-quick report-design Rules Check.

Creating a drill Table

1. Select Menu Manufacture-nc-drill Legend

2. With the default settings, click OK

3. Place the resulting drill table in the board .

PCB inspection matters, create drill table