Project |
Processing capacity |
Process details |
|
Number of layers |
1~6 Layer |
The number of layers refers to the number of electrical layers in the PCB (the number of copper layers). At present Jia Lixin only accept 1~6 layer board. |
|
Plate type |
FR-4 Plate |
Plate type: Cardboard, half glass fiber, all glass fiber (FR-4), aluminum substrate, at present Jia Lixin only accept FR-4 plate. As shown on the right |
|
Maximum size |
40cm * 50cm |
Gali Open material cutting work board size of 40cm * 50cm, usually allow the customer's PCB design size within 38cm * 38cm, the specific document audit shall prevail. |
|
form factor Accuracy |
±0.2mm |
Board shape Tolerance ±0.2mm. |
|
Plate Thickness Range |
0.4~2.0mm |
Gali Current Production Board thickness: 0.4/0.6/0.8/1.0/1.2/1.6/2.0 mm. |
|
Plate thickness tolerance (t≥1.0mm) |
±10% |
such as plate thickness t=1.6mm, the physical plate thickness of 1.44mm (t-1.6x10%) ~1.76mm (t+1.6x10%). |
|
Plate thickness tolerance (t<1.0mm) |
±0.1mm |
such as plate thickness t=0.8mm, the physical plate thickness of 0.7mm (T-0.1) ~0.9mm (t+0.1). |
|
Min. line width |
6mil |
The line width is as large as 6mil and the minimum must be less than 6mil. As shown on the right |
|
Minimum clearance |
6mil |
The gap should be as much as 6mil, minimum not less than 6mil. As shown on the right |
|
Finished layer copper thickness |
1oz~2oz (35um~70um) |
The default conventional circuit board outer copper foil line thickness of 1oz, up to 2oz (need to order note description). As shown on the right |
|
Inner layer copper thickness of finished product |
0.5oz (17um) |
The circuit board inner layer copper foil line thickness unification is 0.5oz. As shown on the right |
|
Bore hole diameter (mechanical drill) |
0.3~6.3mm |
Minimum aperture 0.3mm, maximum aperture 6.3mm, if greater than 6.3mm plant to be treated separately. Mechanical drill bit specifications for the first order of 0.05mm, such as 0.3mm,0.35mm,0.4mm .... As shown on the right |
|
Through hole single-sided solder ring |
≥6mil |
such as conductive hole or plug hole single-sided welding ring is too small, but there is enough space there is no limit to the size of the welding ring side, if there is not enough space and dense lines, the minimum single-sided solder ring must not be less than 6mil. As shown on the right |
|
Bore diameter tolerances (machine drills) |
±0.08mm |
The bore tolerance is ±0.08mm, for example a hole designed for 0.6mm, and the finished aperture of the physical plate is allowed in 0.52--0.68mm. |
|
Solder Solder Type |
Photosensitive Ink |
Photosensitive Ink is now the most used type, hot solid oil is generally used in low-grade single-sided cardboard. As shown on the right |
|
Minimum character justifies |
6mil |
The minimum width of the character, if less than 6mil, the physical board may cause the character is not clear due to design reasons. As shown on the right |
|
Minimum character eigenstates |
≥1mm |
The minimum height of the character, if less than 1mm, the physical board may cause the character is not clear because of the design reason. As shown on the right |
|
Route and form Spacing |
≥0.3mm |
Gong Board shipments, line layer line distance from the board contour line is not less than 0.3mm;v cutting board shipments, the distance from the V-Cut center line can not be less than 0.4mm. |
|
Puzzle: No Gap panel |
0mm Gap Panel |
The gap between the board and the board is 0mm. Click to view larger image |
|
Panel: With Gap puzzle |
2.0mm Gap Panel |
Gap imposition of the gap should not be less than 2.0mm, or the side of the gongs more difficult. Click to view larger image |
|
Pads Factory Copper Paving method |
Hatch Way Copper laying |
Manufacturers are the use of reduced copper (Hatch), pads software Design customers must be careful. As shown on the right |
|
Picture slots in Pads software |
With outline Line |
If the plate on the non-metallic trough more, please use outline painting. |
|
Window layer in PROTEL/DXP software |
Solder Layer |
A few engineers mistakenly put to the paste layer, Jia Lixin to paste layer is not to do processing. |
|
Protel/ad Contour Layer |
To use a keepout layer or a mechanical layer |
Please note: A file allows only one form factor to exist, never allow two form factors at the same time, please remove the absence of the form layer, that is: drawing the shape of the keepout layer or mechanical layer can only be selected one. As shown on the right |
|
Half hole process minimum aperture |
0.6mm |
Half-hole process is a special process, the minimum aperture must not be less than 0.6mm. |
|
Solder Barrier Opening window |
0.1mm |
Solder resist is often said Green oil, Jia Lixin currently do not do solder bridge. |
|