Pcl xl error subsystem: Kernel

The company hp5100 printer does not print the content normally when printing, only print"

Pcl xl Error

Subsystem: Kernel

Error: illegaltag

Operator: 0xff

Position: 61

Baidu finds the following methods and solves the problem. Make a memo.

Fault description:

When the printer prints, the following information appears, instead of printing the content on the paper:
Pcl xl Error

Fault Analysis and solutions:

This problem is usually caused by communication or driver problems.

1. communication problems. solution:

① You can re-plug the data cable after making sure that both the PC and printer are shut down.

In the driver attributes and port labels, disable bidirectional support (see "friendly tip 2" for methods ).

② If the problem persists, continue troubleshooting. There are three main elements that affect communication: data cable, PC port and printer port. You can try replacement in sequence to find the elements that cause the poor communication.

2. the driver has a problem. solution:

① If the communication is correct after check, you can print multiple Windows test pages. If not, we recommend that you replace the pcl5e driver. If PS driver is supported, you can replace the PS driver. We recommend that you disable anti-virus software, firewall, and so on.Program.

② If there is no problem with communication and driver after examination, and there is no problem with text printing, it is very likely to be caused by the special fonts or images in the file, you can try to replace the special font or image in the file, or further process the special font or image. (For details about the method, see friendly tip 3)

3. unusual phenomena:

① This error can also be reported because the power cord is inserted on the plug-in board connected by the power Jack on the wall. You can try to directly Insert the power cord into the power Jack on the wall.

② If the job is too large, an error is reported. You can manually change it to a paging print and B to the small image format. If an error is still reported, the memory may need to be increased.

Friendly tips:

1. HP LaserJet 5100 Series Printers support PS drivers except 5100le and 5100se.

2. Disable two-way support. Please set it in the driver:

Take the 5100 driver in Windows XP as an example.

① Right-click the driver icon in 5100.

② Right-click the last item in the menu-"properties" and click the left button. The "properties" dialog box is displayed, as shown in-1:

Figure-1

③ Click the left button at the "Port" button, as shown in-2:

Figure 2

① Click "√" before "enable bi-" and remove it. Click OK.

3. A. If the PCL driver is used, set it in the driver:

Take the 5100 driver in Windows XP as an example.

① Right-click the driver icon in 5100.

② Right-click the last item in the menu-"properties" and click the left button. The Properties dialog box is displayed, as shown in-3:

Figure-3

③ Click the "Print Preferences" button to bring up the "Print Preferences" dialog box, as shown in-4:

Figure 4

③ Click the "details" button to bring up the "Print Quality details" dialog box, as shown in-5:

Figure 5

④ Click the left button on the check box before "Send TrueType as a bitmap" to display "√ ". Click OK.

B. If the PS driver is used, set it in the driver:

Take the 5100 driver in Windows XP as an example.

① Right-click the driver icon in 5100.

② Right-click the last item in the menu-"properties" and click the left button. The "properties" dialog box is displayed, as shown in-6:

Figure 6

③ Click the "Print Preferences" button to bring up the "Print Preferences" dialog box, as shown in-7:

Figure-7

③ Click the "advanced" button to bring up the "advanced options" dialog box. Click + in front of "Postscript _ option. -8:

Figure-8

④ Expand "Postscript _ options". Click "Auto" after "TrueType font download options. Click "bitmap" in the drop-down list. -9:

Figure-9

Click OK.