Perfect strategy: mobile wireless Internet access settings

Wireless Internet access via mobile phones is not novel. People can connect to the wireless network via GPRS as early as 3G. Now 3G is rampant and WIFI is becoming increasingly popular. This article will take the current mobile phone as an example to introduce the specific content of wireless Internet access settings for mobile phones.

Mobile Wireless Internet access settings

Mobile phone settings (set by WEP encryption)

(1) choose Settings> connection settings> open access point> SELECT> Add access point> use default settings.

(2) connection name (for example, HOME) --> data bearer Method --> select "Wireless LAN" --> WLAN Access Point name (Select automatic search) --> network status (public)-> WLAN Network Mode (basic network) --> WLAN security mode (if the vro has already set a password, select "WEP ",, if no password is set, this is "Open Network --> WLAN Security Settings (use WEP Key" #1 "--> authentication type" open "--> WEP encryption" 64-bit "--> WEP Key format: "hexadecimal" --> enter the WEP key on the home page ,, complete ...... then open the network... you should be able to access the Internet.

Note: This setting can only be set in a wireless network area.

WIFI mobile wireless Internet access settings

1. Set the sub-wireless network card.

First, set the wireless network card. On the wireless page of the network card properties, add a wireless network property and write the network name SSID, for example, X402j.

If necessary, set the password, remove the automatically provided password, and enter the password, for example, 54321

The most important thing is to select the following "this is a computer-to-computer network.

2. Set the sub-nic sharing. In network connection, select your internal Nic.

For example, a wired network card or a physical/virtual network card that provides a network), select Internet sharing in "advanced" of "properties", set your wireless network card name in the sharing column, and click "OK. If your wireless network card has already set an IP address, the system prompts you to set its IP address to 192.168.0.1, Which is silly A Microsoft. After that, your wireless network adapter IP address is 192.168.0.1, which is already shared. Of course, you can modify this IP address.

3. Set and manually create a connection. By default, choose tools in the menu> Settings> connection settings> access points unless you have adjusted your location)

Add an access point to the access point-> use the default settings to set any connection name, such as: Book

Select "Wireless LAN" as the data bearer Method"

Set the WLAN network name as your wireless network name SSID, as shown in the above "X40"

Select "public" for the network status"

Select "special" for the WLAN Network Mode)

WLAN security mode. If the WEP password is set in this notebook, it is also set to WEP here. If this book is not set, select "Open Network ".

WLAN Security Settings. If the password is set in this notebook, set it here.

The WEP Key used. "#1" is used by default"

Set the authentication type to "open"

WEP key settings: Set the password of your notebook Network

Select "64-bit" for WEP Encryption"

Select "ASCII" for the WEP Key format"

The WEP Key is the wireless key of the notebook, for example, 54321.

Home Page, personal, casual

Then go to Advanced Settings

IPv4 settings

The IP address of your mobile phone is set to share the IP address of a network segment of the wireless network card with your notebook, for example, 192.168.0.100.

Subnet Mask: 255.255.255.0

Default Gateway: IP address of the wireless network card shared by 192.168.0.1)

DNS address: IP address of the wireless network card shared by 192.168.0.1)

No need to set IIPv6 settings

Special channel: automatic

Proxy server address: On Demand

Proxy port number: On Demand

The connection method is best to ask every time, and then select the connection you set.