Perfecting Intelligent Wiring System: solving strategy

Intelligent wiring system began appearing in the middle of the 80 's, the main reason is that the network administrator to use manual record wiring link information is very laborious, and they also want to be able to the wiring system for real-time monitoring.

Real-time cabling systems simplify the move, add, and Change (MAC) process by using a computer-generated worksheet. The progress of these worksheets can be monitored offsite through network connections or network ports supported by intelligent cabling systems in the communication room. Network administrators can determine the order in which moves, additions, and changes are performed, as this is closely related to the physical layout of both active and passive devices. Technicians can obtain real-time feedback, accurate understanding of the operation of the plug, verify that all connections are correct, function is normal.

How to reduce network fault time and simplify the maintenance time of network Mac (move, increase, change) has become a serious problem in the network management of many large and medium-sized enterprises. In China, after more than 10 years of rapid development of cabling engineering, the concept of intelligent cabling solution has been increasingly accepted from the initial period of basic construction to the management application period.

Today, with the development of information technology and the increasing demand of network application, the network infrastructure is becoming more and more complex, and many developing companies are becoming more and more complex as the business expands and the network scale expands and the network infrastructure management becomes more and more complicated.

A reasonable and optimized intelligent cabling solution, can make the enterprise's wiring system and network system running more stable, so understand this knowledge is also very useful, so we discussed the intelligent wiring solutions need to pay attention to the problem, here to take out and share with you, hope for everyone useful.

Hardware and software double swords

The Amptrac system realizes the complete and organic combination of hardware and software system, the user can obtain the configuration structure and running state of the wiring and network system in real time, and monitor and alarm all kinds of illegal operation through the predefined strategy. At the same time, the system can be integrated with user's existing network management system (such as Hpopenview, Caunicenter, Ibmtivoli, etc.), and provide more complete management service for users. More Wonderful content: http://www.bianceng.cn/Network/zhbx/

This system can make any wiring system and the equipment connected with it become intelligent network, and reduce the cost and time consumption of manual management wiring system. The system is still based on the traditional AMPNETCONNECT110 modular structured wiring system, users can use any manufacturer of network products, the difference is that the system in the wiring frame each RJ-45 port added a metal sensor pad (sensorpad), jumper outside the addition of a metal needle, The metal pin is contacted with the induction pad of the 110 wiring frame, and the 110 wiring frame is connected to the Network Analyzer (Analyzer) through an I/O cable.

The network analyzer and iTRACS software can monitor the connection status between the distribution frame, the network equipment and the wiring frame in real time and dynamically. The combination of Amptrac hardware and iTRACS software system makes up the missing physical layer link in the previous Integrated network management system, and it is the revolutionary method of network control and archive management. This unified infrastructure management system can automatically generate a complete physical topology map of the network system in the telecommunication or data center, through real-time physical layer automatic management, provide a real-time, complete network fault diagnosis and disaster recovery documentation, uninterrupted real-time recording of the network cabling system to increase, move, delete, Can significantly reduce the amount of network administrator manual logging of network Connections. When the network fails, the network administrator can be the fastest speed to troubleshoot, thus greatly reducing the loss caused by network downtime.

Enterprise-Class Analyzer

1. Height is 1U and 6U two kinds

2.1U Height Analyzer can monitor 240 ports

3. The standard 6U Height Analyzer monitors 480 ports and can monitor up to 1920 ports by adding expansion cards (6 slots in the analyzer)

4. Expansion cards for 6U height Analyzer each can monitor 240 ports

Department Level Analyzer

1. Analyzer provides 128 monitoring ports through DB25 connectors and one RJ-45 connector

2. Provide 2 renewal outputs for controlling the expansion device

Analyzer

The analyzer is divided into enterprise-level and departmental-level, enterprise-class and independent-type, master-control and connection-type three configuration. Configurations from 240 standard ports to 1920 ports can be provided according to the different requirements of the user.

Independent analyzer can be used independently, cannot be connected to other parsers (master or join); The Master parser cannot be joined to other master or standalone parsers, but it can be connected to up to 9 connector analyzers, while the connectivity Analyzer is primarily used to extend the connectivity of the Master Analyzer. And the length of the connecting cable can not exceed 15 meters. Both standalone and master parsers are connected to the database through 10BASE-T Ethernet and TCP/IP protocols.

Timely and automated physical layer management is a rapidly growing market. The user's awareness of the need for integrated network management solutions is increasing, and intelligent cabling systems can reduce the management of changing network pressures and minimize the disruption of network time. A perfect intelligent wiring solution is very concerned about.