Perform pxe boot winpe in linux

In linux, run pxe to guide winpe-Linux Enterprise Application-Linux server application information. The following is a detailed description. For pxe in linux, tftpd-hpa or atftpd needs to be installed, but the service cannot be started. Using ps aux | grep tftp, you cannot see atftpd or tfypd-hpa, but netstate-l | grep udp can see that the tftp service has been started and is waiting on the udp69 port. If the/etc/init. d/atftpd start or/etc/init. d/tftpd-hpa start. port can't bind 69/udp already in used will be reported in/var/log/syslog, or something similar.

The reason is that the default tftpd service in linux uses/etc/inetd. conf. You only need to cancel the configuration statement in it:

Tftp dgram udp wait root/usr/sbin/in. tftpd/usr/sbin/in. tftpd-s/var/lib/tftp boot

Change

# Tftp dgram udp wait root/usr/sbin/in. tftpd/usr/sbin/in. tftpd-s/var/lib/tftp boot

In addition, if you use atftd, note/etc/init. "USE_INETD = true" is defined in the d/atftpd header, and if [USE_INETD = true] exit 0 is later. This is obviously incorrect. You need to change this true to false.

Tftpd is not used because tsize transmission mode is not supported.