This tutorial presents a quick way to make hot air balloons. General process: first, using rectangular tools such as a rectangular color block, and then rendering the edge of the darkened and the middle of the high light to make three-dimensional. Appropriate to do the graphics spherical and then copied, combined, and then deformation to make the required sphere.
Version requirements: CS2 and above are required.
Final effect
1, a new size appropriate document, background filled with gray. Create a new layer, draw 11 color blocks, like broadband, the effect of the following figure.
2, to each color block plus the inner glow, the effect of the following figure.
3, press CTRL + T deformation, right button selection deformation, and then the property bar selection puffed, bending set to 20%, the effect of the following figure.
4, superimposed 2 layers, a layer of projection a layer of high light, the effect of the following figure.
5, the good graphics copy several layers, as shown in the following figure arrangement.
6. Turn all the things in front into smart packages and place them in a square canvas for 2 spherical surfaces.
7, again to the front of all things into intelligent package, and then deformation treatment, the effect of the following figure.
Finally, add the hanging basket and so on to complete the final effect.
Category:
- PS Getting Started Tutorial