Photoshop adds a sweet, refreshing red to the little roadside beauties.

The difficulty of the tutorial is the leaf part of the color palette, the material leaves are yellow-green, colour matching needs to be slightly differentiated, first of all to control the yellow and green ratio, and then turn green to cyan, yellow to orange to red.

Original

Final effect

1, open the material picture, press CTRL + ALT + 2 to pull up the high light constituency, create a new layer fill light green: #C5D6CC, change the blending mode to "dimmed" and the opacity to: 50%; hold down the ALT key to add the layer mask, and use the white brush to erase the upper left corner, the effect is as follows.

< map 1>

2, create an optional color adjustment layer, red, yellow, green adjustment, parameter settings such as Figure 2-4, the effect is shown in Figure 5. This step turns the green in the picture into green.

< map 2>

< map 3>

< map 4>

< map 5>

3, and then create an optional color adjustment layer, red, yellow, green adjustment, parameter settings such as Figure 6-8, determined in the mask with a black brush on the head area of the figure, the effect is shown in Figure 9. This step adds green to the background section.

< map 6>

< map 7>

< map 8>

< map 9>

4, press CTRL + J to copy the current optional color adjustment layer, the opacity to: 50%, the effect of the following figure.

< map 10>

5, create an optional color adjustment layer, the yellow, green adjustment, parameter settings such as Figure 11,12, the effect is shown in Figure 13. This step adds orange color to the picture.

< map 11>

< map 12>

< map 13>

6, create hue/saturation adjustment layer, the yellow, green adjustment, parameters and effects of the following figure. This step turns the yellow-green in the picture into orange-red.

< map 14>

< map 15>

< map 16>

7, create a color balance adjustment layer, the shadow, midtones, highlight adjustment, parameter settings such as Figure 17-19, after the mask to fill the black, with a white brush to the road and the left side of the wall part of the screen, the effect is shown in Figure 20. This step adds green to the ground section.

< map 17>

< map 18>

< map 19>

< map 20>

Classification:

• PS Palette Tutorial