The main color of the material is yellow-green, color when the yellow into orange, green to dark green, and then the backlight area, dark, and then add some blue; Finally the overall soft treatment, strengthen the local light and shade can be.
Original
Final effect
1, open the material picture, press CTRL + ALT + 2 to bring up the high light selection, press CTRL + Shift + I to select the dark part, and then create the curve adjustment layer, the red, green, blue channel adjustment, parameter settings such as Figure 1-3, the effect is as Figure 4. This step adds blue to the dark part.
< map 1>
< map 2>
< map 3>
< map 4>
2, create a color balance adjustment layer, the shadow, midtones, high light adjustment, parameter settings such as Figure 5-7, determined to press CTRL + ALT + G to create a clipping mask, the effect is shown in Figure 8. This step adds bluish green to the dark part of the picture.
< map 5>
< map 6>
< map 7>
< map 8>
3, create an optional color adjustment layer, yellow, green, green, neutral, black adjustment, parameter settings such as Figure 9-13, determine the same method after the creation of clipping masks, the effect is shown in Figure 14. This step darkens the dark color.
< map 9>
< map 10>
< map 11>
< map 12>
< map 13>
< map 14>
Classification: