Photoshop creates classic Lomo style architectural beauty pictures

Lomo style picture better grasp, there are three major features: first screen details have some loss, color with decadent feeling, and some distortion, dark corners are more prominent.

Original

Final effect

1, open the material picture, create curve adjustment layer, RGB, red, blue channel adjustment, parameter settings such as Figure 1-3, the effect is shown in Figure 4. This step is mainly the picture of the color dimming, and to the high light area to increase the light yellow.

< map 1>

< map 2>

< map 3>

< map 4>

2, create an optional color adjustment layer, the red, white, neutral color adjustment, parameter settings such as Figure 5-7, the effect is shown in Figure 8. This step also adds light yellow to the Highlight and Midtones section.

< map 5>

< map 6>

< map 7>

< map 8>

3, create curve adjustment layer, the RGB, red, blue channel adjustment, parameters and effect of the following figure. This step deepens the dark part of the picture and adds a warm color.

< map 9>

< map 10>

4, press CTRL + ALT + 2 to bring up the highlight selection, create a solid color adjustment layer, color set to light yellow: #FBE8A6, to determine the blending mode to "lighten", the opacity to: 50%, the effect of the following figure. This step adds light yellow to the picture's high light portion.

< map 11>

5, press CTRL + ALT + 2 to bring up the high light selection, press CTRL + Shift + I to select the dark selection, and then create a curve adjustment layer, RGB, red, blue channel adjustment, parameter settings such as Figure 12-14, the effect is as Figure 15. This step deepens the darker color of the picture and increases the bluish violet.

< map 12>

< map 13>

< map 14>

< map 15>

6, press CTRL + J to adjust the current curve layer copy layer, the effect of the following figure.

< map 16>

7, create curve adjustment layer, the RGB, green, blue channel adjustment, parameter settings such as Figure 17, to determine the mask filled with black, with a white brush to the bottom and the upper right part of the rub out, the effect is shown in Figure 18. This step adds a dark angle to the picture.

< map 17>

< map 18>

8, create a solid color adjustment layer, color set to dark red: #95540E, to determine the mask filled with black, with a lower level of transparency of the white soft brush to wipe out the next figure selection, and then change the blending mode to "filter Color", the effect of the following figure. This step adds a high light to the middle of the picture.

< map 19>

9, press CTRL + J to copy the current solid color adjustment layer, the opacity to: 50%, the effect of the following figure.

< map 20>

10, create a new layer, press the letter key "D" before the background color to restore to the default black and white, and then select the menu: Filter > Render > Cloud, after determining the blending mode to "filter Color", the opacity to: 30%, the effect of the following figure. This step is slightly lighter for the main color of the picture.

< map 21>

11, create a color balance adjustment layer, the shadow, highlight adjustment, parameter settings such as Figure 22,23, determined to press CTRL + ALT + G to create a clipping mask, the effect is as shown in Figure 24. This step is to fine-tune the dark part of the cloud and the color of the high light.

< map 22>

< map 23>

< map 24>

12, create curve adjustment layer, the RGB, red, green channel fine-tuning, the parameters are set as follows.

< map 25>

< map 26>

< map 27>

13, create an optional color adjustment layer, the black adjustment, parameters and effects of the following figure. This step adds blue to the dark part of the picture.

< map 28>

< map 29>

Finally, fine-tune the overall color, complete the final effect.

Category:

• PS Image Processing