Photoshop photo Cyan dimming Effect Palette Tutorial

For the users of Photoshop software to share the color of the photo cyan darkened effect of the palette tutorial.

Tutorial Sharing:

Original

1, open the original material large image, press CTRL + J to copy a layer of background layer, using fuzzy tools to the next figure selection part of the fuzzy processing.

< map 1>

2, create an optional color adjustment layer, yellow, green, green, black to adjust, parameter settings such as Figure 2-5, the effect is shown in Figure 6. This step turns the yellow-green in the picture to green and darkens a little.

< map 2>

< map 3>

< map 4>

< map 5>

< map 6>

3, press CTRL + ALT + 2 to bring up the high light selection, press CTRL + Shift + I to select the dark selection, then create the curve adjustment layer, the RGB, red, green, blue channel adjustment, parameters and effects as shown below. This step darkens the dark part of the picture and increases the bluish violet.

< map 7>

< map 8>

4, create a color balance adjustment layer, the shadow, midtones, high light adjustment, parameter settings such as Figure 9-11, determined to press CTRL + ALT + G to create a clipping mask, the effect is shown in Figure 12. This step also adds blue to the dark part of the picture.

< map 9>

< map 10>

< map 11>

< map 12>

5, CTRL + ALT + 2 up the high light selection, and then create a curve adjustment layer, the RGB channel adjustment, parameters and effects of the following figure. This step puts the high light area slightly darker.

< map 13>

< map 14>

6, press CTRL + ALT + 2 to bring up the high light selection, and then create a solid color adjustment layer, the color is set to blue: #2579F5, to determine the blending mode changed to "color", the effect of the following figure. If Blue is not clear enough, you can press CTRL + J to copy the current layer one layer to reduce the opacity of the layer appropriately.

< map 15>

7, create an optional color adjustment layer, green, blue, white adjustment, parameter settings such as Figure 16-18, the effect is shown in Figure 19. This step mainly turns blue to cyan and adds light cyan to the high light area.

< map 16>

< map 17>

< map 18>

< map 19>

8, now we are to render the smoke effect

Create a new layer, press the letter key "D" before, the background color reverts to the default black and white; then select the menu: Filter > Render > Cloud, make sure the blending mode is changed to "filter", Alt-click to add layer mask, and use a soft white brush with lower transparency to highlight the middle area.

< map 20>

9, press CTRL + J to copy the current cloud layer, then fill the mask with black, and then use a soft white brush with less transparency to paint the bottom of the selection section.

< map 21>

10, press CTRL + J to copy the current layer of cloud layer, the above method of the following figure selection part of the painting a little brighter.

< map 22>

11, create a color balance adjustment layer, the shadow, midtones adjustment, parameter settings such as Figure 23,24, after the mask filled with black, and then with a lower transparency of the soft edge of the white brush to wipe out the middle area, the effect is shown in Figure 25.

< map 23>

< map 24>

< map 25>

12, the background layer to copy a layer, press CTRL + Shift +] top, with the pen tool to pull out the character's clothes, into the selection after adding a layer mask, the effect of the following figure.

< map 26>

13, create curve adjustment layer, the RGB, red, green, blue channel adjustment, parameter settings such as Figure 27, determined after the creation of a clipping mask, the effect is shown in Figure 28. This step darkens the part of the garment and increases the cool color.

< map 27>

< map 28>

14, the background layer to copy a layer, press CTRL + Shift +] top, with the pen tool to the characters face and skin part of the pull out, into the selection after adding a layer mask, the effect of the following figure.

< map 29>

15, create curve adjustment layer, the RGB, red, blue channel fine-tuning, parameter settings such as Figure 30, determine after the creation of a clipping mask, the effect is shown in Figure 31. This step lightens the complexion of the character slightly.

< map 30>

< map 31>

16, create an optional color adjustment layer, red, yellow, white to adjust, parameter settings such as Figure 32-34, determined after the creation of a clipping mask, the effect is shown in Figure 35. This step is to make the character's skin tone a little rosy.

< map 32>

< map 33>

< map 34>

< map 35>

17, create a color balance adjustment layer, adjust the high light, parameter settings such as Figure 36, after the creation of a clipping mask, the effect is shown in Figure 37. This step adds a light cyan to the color-high area.

< map 36>

< map 37>

18, the creation curve adjusts the layer, to the RGB, the blue channel adjusts, the parameter setting is like Figure 38, determines after the mask fills the black, then uses the soft side white brush to the left and the bottom area spreads the dark point, the effect is like Figure 39. This step adds a dark angle to the picture.

< map 38>

< map 39>

19, create curve adjustment layer, the RGB channel down a little bit, parameter settings such as Figure 40, after the mask filled with black, and then with the lower transparency of the soft white brush to the character backlight area painted darker, the effect is as Figure 41.

< map 40>

< map 41>

20, create a new layer, press CTRL + ALT + Shift + E-stamped layer, with their familiar methods to soften the picture, the effect of the following figure.

< map 42>

21, create an optional color adjustment layer, the cyan adjustment, parameters and effects of the following figure. This step darkens the cyan hue in the picture.

< map 43>

< map 44>

22. Create a new layer, use the elliptical marquee tool to pull out the selection shown in the following figure, feather 30 pixels and fill the dark cyan: #6FBAB0, remove the selection and change the blending mode to "color filter", and the effect is as follows. This step adds a high light to the picture.

< map 45>

Finally, strengthen the local light, fine-tuning the character skin color, complete the final effect.

Well, the above information is small compiled for you photoshop software users of the detailed photo cyan darkened effect of the palette to share all the content, you see the users here, small knitting believe that you are now very clear cyan darkened palette of color tutorial, So now go to the small part of the share of their own to try it.