For the users of Photoshop software, talk about making tutorials that give girls on the lawn a fantastic blue-red glow effect.
1, open the original material large map, create an optional color adjustment layer, yellow, green, white, neutral color adjustment, parameter settings such as Figure 1-4, the effect is shown in Figure 5. This step mainly turns yellow into orange in the picture, and darkens the green part, and the high light area increases the light cyan.
2, create an optional color adjustment layer, the yellow, green adjustment, parameters and effects of the following figure. This step adds orange color to the picture.
3, press CTRL + ALT + 2 to bring up the high light selection, press CTRL + Shift + I to select the dark selection, then create the curve adjustment layer, the RGB, green, blue channel adjustment, parameters and effects as shown below. This step darkens the dark color of the picture and increases the bluish violet.
4, press CTRL + J to copy the current curve adjustment layer, press CTRL + ALT + G to create a clipping mask, the effect of the following figure.
5, create an optional color adjustment layer, the red, yellow, white, neutral color adjustment, parameter settings such as Figure 12-15, determined after the creation of a clipping mask, the effect is shown in Figure 16. This step adds brown to the darker part of the picture.
6, create curve adjustment layer, the RGB, red, green, blue channel adjustment, parameter settings such as Figure 17-20, determined after the creation of a clipping mask, the effect is shown in Figure 21. This step mainly adds blue to the dark part of the picture.
7, create a color balance adjustment layer, the shadow, midtones, high light adjustment, parameter settings such as Figure 22-24, determined to create a clipping mask, the effect is shown in Figure 25. This step also adds blue to the dark part of the picture.
8, CTRL + ALT + 2 up the high light selection, and then create a curve adjustment layer, RGB, green, blue channel adjustment, parameter settings such as Figure 26-28, the effect is as Figure 29. This step mainly adds light blue to the picture's high light area.
9, the background layer to copy a layer, press CTRL + Shift +] top. Enter the channel panel, copy the blue channel and get the blue copy channel. Press CTRL + L to adjust the level of the blue Copy channel, turn the sky White, other areas darkened, as shown below.
10. Use the soft side black brush to black the area outside the sky, as shown below.
11, press CTRL + the left mouse button click on the blue Copy channel to load the selection, point RGB channel back to the layer board. Create a new layer, fill the white with the paint bucket tool, remove the background copy layer after canceling the selection, and the effect is shown below.
12, open the sky material large map, with the move tool dragged in, create a clipping mask after adjusting the position, the effect is as shown in Figure 33.
< small map view big picture >
13, select the menu: Filter > Blur > Gaussian blur, the value is 5, the sky appropriate fuzzy processing, the effect of the following figure.
14. Press CTRL + J to copy a layer of Sky layer, when you create a clipping mask, change the blending mode to "multiply" and the opacity to: 50%; alt-click to add a layer mask, and use the lower edge white brush to darken the top area of the sky, as shown below.
15, create curve adjustment layer, the RGB, red, green, blue channel adjustment, parameter settings such as Figure 36, determined after the creation of a clipping mask, the effect is shown in Figure 37. This step darkens the sky part a little.
16, create an optional color adjustment layer, red, yellow, white to adjust, parameter settings such as Figure 38-40, determined after the creation of a clipping mask, the effect is shown in Figure 41. This step is mainly to reduce the sky part of the red.
17, press CTRL + J to copy the current optional color adjustment layer, and then create a clipping mask, the effect of the following figure.
18, create a new layer, using Lasso tool to check out the selection shown in the following figure, feather 45 pixels after the fill orange red: #E57F78, remove the selection after the blending mode to "overlay", the opacity to: 60%, the effect of the following figure.
19, press CTRL + J to copy the current layer, blending mode to "soft light", the opacity to: 100%, the effect of the following figure.
20. Press CTRL + J to copy the current layer, lock the pixel area, fill the light red with the paint bucket tool: #F68E91, and then press CTRL + T a little smaller, then the blending mode to "filter", the effect of the following figure.
21, press CTRL + J to copy the current layer layer, the effect of the following figure.
22, create a new layer, using Lasso tool to check out the selection shown in the following figure, feather 15 pixels after the fill of pale yellow: #FFD0A2, remove the selection after the blending mode to "filter", the effect of the following figure. These steps add a light red light to the picture.
23, the background layer to copy a layer, press CTRL + Shift +] top, with the pen tool to pull out the characters, into the selection after adding layer mask, the effect of the following figure.
24, create curve adjustment layer, RGB, blue channel adjustment, parameter settings such as Figure 49, after the creation of a clipping mask, the effect is shown in Figure 50. This step darkens the character part a little bit.
25. Create a new layer, set the foreground color to dark blue: #492A63, and then use the lower edge of the transparency brush to darken the bottom area, the effect of the following figure.
26, create a new layer, press the letter key "D" before the background color to restore to the default black and white, and then select the menu: Filter > Render > Cloud, determine the blending mode changed to "Color", the opacity to: 40%. To add a layer mask, the top and bottom areas are dimmed with a less transparent black soft brush, and the effect is shown below. This step adds a smoke effect to the middle of the picture.
27, create a color balance adjustment layer, the shadow, highlight adjustment, parameter settings such as Figure 53,54, after the creation of a clipping mask, the effect is shown in Figure 55. This step adds blue to the Cloud section.
28, create a color balance adjustment layer, the high light adjustment, parameters and effect of the following figure. This step adds light blue to the picture's high light area.
Finally fine-tune the color, strengthen the local light and finish the final effect.
Well, the above information is a small series of users of Photoshop's software to bring the details of the girls on the lawn with a dream of the blue-red glow effect of the production of the full content of the tutorial to share, in general, the main color is converted to warm, and then the Sky section is replaced with the glow material; Then the overall color, the darker part of a little blue, the high light area to increase light blue, and finally render some of the high light, fine-tuning the character color can, then now go to their own try it.
