Material picture of the sky white, the picture is a little empty. When dealing with the sky part of the first to increase the rays of the material, and some of the messy part of the modified, and then the main color into warm, a feeling of autumn, and finally darkened the screen, rendering high light can.
Original
Final effect
1, open the original material large map, create an optional color adjustment layer, yellow, green, green, neutral color adjustment, parameter settings such as Figure 1-4, the effect is shown in Figure 5. This step turns yellow to orange in the picture and green to dark cyan.
< map 1>
< map 2>
< map 3>
< map 4>
< map 5>
2, press CTRL + J to copy the current optional color adjustment layer, the opacity to: 50%, the effect of the following figure.
< map 6>
3, create curve adjustment layer, RGB, red, green, blue channel adjustment, parameter settings such as Figure 7-10, the effect is shown in Figure 11. This step darkens the dark part of the picture and adds light blue to the high light area.
< map 7>
< map 8>
< map 9>
< map 10>
< map 11>
4, create hue/saturation adjustment layer, to adjust the cyan, parameters and effects as shown below. This step turns cyan to green and a little brighter.
< map 12>
< map 13>
5, create curve adjustment layer, to RGB, red, green channel adjustment, parameter settings such as Figure 14, after the mask filled with black, and then with a soft white brush to the upper left corner part of the rub out, as Figure 15. This step darkens the upper left corner area.
< map 14>
< map 15>
6, the background layer to copy a layer, press CTRL + Shift +] Top, the following figure.
< map 16>
7. Enter the channel panel, copy the blue channel and get the blue copy channel. Then press CTRL + M to adjust the curve to the blue copy channel, darken The dark, highlight the highlights, and then use a black brush to black out the parts of the sky, as shown below.
< map 17>
8, hold down CTRL + the left mouse button click on the blue copy channel thumbnail load selection, point RGB channel to return to the layers panel. Create a new layer fill white, remove the selection, and then use the transparent lower soft white brush to paint the sky part of the noise and clutter of the part of white, and then hide the background layer, the following figure.
< map 18>
Classification: