Photoshop to make a beautiful classical dark green Spring characters tutorial

Source: Internet
Author: User
To the users of Photoshop software to share the production of the beautiful classical dark green Spring characters tutorial.
Tutorial Sharing:
1, open the original material large image, create an optional color adjustment layer, yellow, green adjustment, parameters and effects of the following figure. This step adds green to the picture.

< map 1>

< map 2>

< map 3>
2, press CTRL + J to copy the current optional color adjustment layer, the opacity to: 50%, the effect of the following figure.

< map 4>
3, create hue/saturation adjustment layer, the yellow adjustment, parameters and effects as shown below. This step turns yellow in the picture to neutral green.

< map 5>

< map 6>
4, press CTRL + ALT + 2 to bring up the high light selection, press CTRL + Shift + I to select the dark selection, and then create a curve adjustment layer, RGB, red, green, blue channel adjustment, parameter settings such as Figure 7-10, the effect is as Figure 11. This step darkens the dark part of the picture and adds blue-green.

< map 7>

< map 8>

< map 9>

< map 10>

< map 11>
5, press CTRL + J to adjust the current curve layer copy layer, the effect of the following figure.

< map 12>
6, create a color balance adjustment layer, the shadow, highlight adjustment, parameter settings such as Figure 13,14, determined to press CTRL + ALT + G to create a clipping mask, the effect is as shown in Figure 15. This step adds blue to the dark part of the picture.

< map 13>

< map 14>

< map 15>
7, create curve adjustment layer, the RGB channel adjustment, parameter settings such as Figure 16, determined after the creation of clipping masks, the effect is shown in Figure 17. This step increases the dark contrast of the picture.

< map 16>

< map 17>
8, create a new layer, press the letter key "D" before the background color back to the default black and white, and then select the menu: Filter > Render > Cloud, determine the blending mode to "color". Hold down the ALT key to add a layer mask, and rub the middle area out with a less transparent white brush, as shown below. This step adds a smoke effect to the middle of the picture.

< map 18>
9, press CTRL + J to copy the current layer, the mask filled with black, and then with the transparency of the lower soft edge white brush to wipe out the bottom of the selection section, increase the brightness of the middle of the smoke.

< map 19>
10, press CTRL + J to copy the current layer layer, the effect of the following figure.

< map 20>
11, create brightness/Contrast adjustment layer, the appropriate increase in brightness and contrast, parameter settings such as Figure 21, to determine the mask filled with black, and then use the lower transparency of the soft edge of the white brush to wipe out the middle area, the effect is as shown in Figure 22.

< map 21>

< map 22>
12, the background layer to copy a layer, press CTRL + Shift +] top, with the pen tool to pull out the characters clothes part, into the selection after adding a layer mask, the effect of the following figure.

< map 23>
13, create a color balance adjustment layer, the shadow, highlight adjustment, parameter settings such as Figure 24,25, after the creation of a clipping mask, the effect is shown in Figure 26. This step adds green to the clothes section.

< map 24>

< map 25>

< map 26>
14, copy the background layer, press CTRL + Shift +] Top, then enter the channel panel, select the green channel, press CTRL + A all selected, press CTRL + C copy, select the blue channel, press CTRL + V paste.
Point RGB Channel to return to the layer board, with pen tools, the face and skin color part of the pull out, into the selection after adding a mask, the effect of the following figure.

< map 27>
15, create curve adjustment layer, the RGB channel adjustment, parameter settings such as Figure 28, determined after the creation of clipping masks, the effect is shown in Figure 29. This step brightens up the character's complexion.

< map 28>

< map 29>
16, create optional color adjustment layer, red, white to adjust, parameter settings such as Figure 30,31, after the creation of a clipping mask, the effect is shown in Figure 32. This step darkens the color of the skin part, and the high light area adds a light cyan hue.

< map 30>

< map 31>

< map 32>
17, create brightness/Contrast adjustment layer, the appropriate increase in brightness, parameter settings such as Figure 33, determined after the creation of a clipping mask, the effect is shown in Figure 34. This step increases skin tone brightness.

< map 33>

< map 34>
18, create curve adjustment layer, the RGB, blue channel adjustment, parameter settings such as Figure 35, after the mask to fill the black, and then with a soft white brush to the corners of the area painted darker, the effect is as Figure 36. This step adds a dark angle to the picture.

< map 35>

< map 36>
19. Create a new layer, use the elliptical marquee tool to pull out the selection shown in the following figure, feather 35 pixels and fill the pale green: #A7CBB0, remove the selection and change the blending mode to "color filter", and the effect is as follows. This step increases the brightness of the middle area of the picture.

< map 37>
20, create curve adjustment layer, the RGB channel down a bit, parameter settings such as Figure 38, after the mask to fill the black, and then with a soft white brush to the character backlight area, the effect is shown in Figure 39.

< map 38>

< map 39>
21, create a new layer, press CTRL + ALT + Shift + E-stamped layer. Then change the blending mode to "color filter", hold down the ALT key to add the layer mask, use the transparent lower soft edge white brush to light up the area of the left side of the character's hair, and the effect is shown below.

< map 40>
22, press CTRL + ALT + 2 to bring up the high light selection, press CTRL + Shift + I to select the dark selection, then create the curve adjustment layer, the RGB, red, green, blue channel adjustment, parameters and effects as shown below. This step darkens the dark part slightly and increases the cool color.

< map 41>

< map 42>

< map 43>

< map 44>

< map 45>
23. New layer, stamped layer, blur the middle area with fuzzy tool, the following figure.

< map 46>
24, according to the need for the image of the middle area to add a little high light.

< map 47>
Finally, the image of soft processing, and then to the character of the skin, finish the final effect.

Okay, the above information is small make up to you photoshop this software users brought to the detailed production of the aesthetic classical dark green spring characters of the entire content of the tutorial, you see the users here Photoshop software, now you are very clear the production method of it, Then go and fix your own pictures now.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.