The color of the material picture is more distinct, the colour matching is also simpler, turn the high light color into the light cyan, the leaf color turns to the yellow-brown, then adds the blue to the dark part, and the whole treatment soft can.
1, open the material picture, press CTRL + ALT + 2 to bring up the high light selection, create a solid color adjustment layer, color set to light cyan: #DFFEF8, after the blending mode to change to "darken", the opacity to: 60%, the effect of the following figure. This step adds a light cyan to the high light area.
< map 1>
2, the creation of optional color adjustment layer, yellow, green, white, black adjustment, parameter settings such as Figure 2-5, the effect is shown in Figure 6. This step adds green to the dark part of the picture, and the high light portion increases the light cyan.
< map 2>
< map 3>
< map 4>
< map 5>
< map 6>
3, create hue/saturation adjustment layer, the yellow, green adjustment, parameter settings such as Figure 7,8, the effect is shown in Figure 9. This step mainly turns the green in the picture to reddish brown.
< map 7>
< map 8>
< map 9>
4. Press CTRL + J to copy the current hue/saturation adjustment layer and change the opacity to: 50%, the effect is as follows.
< map 10>