The main color of the material picture is dark green, when the color palette can turn slightly bright green to orange yellow, green and dark color to yellow-green, and then to the picture part of the increase of a little high light, and then the overall tone can be soft.
Original
Final effect
1, open the material picture, create the optional Color adjustment layer, adjust the green, parameters and effect as shown below. This step adds green to the picture.
< map 1>
< map 2>
2, press CTRL + J to copy the current optional color adjustment layer, the effect of the following figure.
< map 3>
3, create an optional color adjustment layer, the yellow, green adjustment, parameters and effects of the following figure. This step mainly turns yellow into orange yellow in the picture.
< map 4>
< map 5>
< map 6>
4, press CTRL + J to copy the current optional color adjustment layer, the opacity to: 30%, the effect of the following figure.
< map 7>
5, create hue/saturation adjustment layer, red, yellow, green, green adjustment, parameter settings such as Figure 8-11, the effect is shown in Figure 12. This step appropriately reduces the warm and green saturation of the picture and softens the main color of the picture.
< map 8>
< map 9>
< map 10>
< map 11>
< map 12>
6, create an optional color adjustment layer, red, yellow, neutral color adjustment, parameter settings such as Figure 13-15, the effect is shown in Figure 16. This step adds a little warm color to the picture.
< map 13>
< map 14>
< map 15>
< map 16>
7, create curve adjustment layer, RGB, red, blue channel adjustment, parameter settings such as Figure 17-19, the effect is shown in Figure 20. This step mainly to the main color of the picture is a little lighter.
< map 17>
< map 18>
< map 19>
< map 20> categories: