The material picture is good, but the picture is not beautiful enough. When dealing with the first color palette to the main color into a more uniform blue color, and then in the middle area to increase smoke and render high light, and then fine-tune the character color, to the picture to increase the dark angle and strengthen the local light and shade can be.
Original
Final effect
1, open the original material large image, create an optional color adjustment layer, green adjustment, parameters and effect of the following figure. This step turns the green in the picture into green.
< map 1>
< map 2>
2, press CTRL + J to copy the current optional color adjustment layer, the effect of the following figure.
< map 3>
3, the creation of optional color adjustment layer, yellow, green, white adjustment, parameter settings such as Figure 4-6, the effect is shown in Figure 7. This step mainly turns the yellow-green in the picture into green.
< map 4>
< map 5>
< map 6>
< map 7>
4, press CTRL + J to copy the current optional color adjustment layer, the effect of the following figure.
< map 8>
5, create hue/saturation adjustment layer, the whole map, yellow, green adjustment, parameter settings such as Figure 9-11, the effect is shown in Figure 12. This step turns the remaining yellow-green in the picture to green, while reducing the saturation of the entire image.
< map 9>
< map 10>
< map 11>
< map 12>
6, press CTRL + J to copy the current hue/saturation adjustment layer, the effect of the following figure.
< map 13>
7, create curve adjustment layer, RGB, red, green, blue channel adjustment, parameters and effect of the following figure. This step darkens the picture and adds blue to the picture's dark and high light areas.
< map 14>
< map 15>
8, create a new layer, press the letter key "D" before the background color back to the default black and white, and then select the menu: Filter > Render > Cloud, determine the blending mode to "color".
Add a layer mask, select the Gradient tool, color is set to black and white, and then pull from the left middle position to the corner to the black radial gradient, the effect of the following figure. This step adds a smoke effect to the middle of the picture.
< map 16>
9. Press CTRL + J to copy the current cloud layer, press CTRL + ALT + G to create a clipping mask, then fill the mask with black, and use a soft white brush to erase the bottom part of the picture, the effect is as follows.
< map 17>
10, create a color balance adjustment layer, the shadow, highlight adjustment, parameter settings such as Figure 18,19, after the creation of a clipping mask, the effect is shown in Figure 20. This step adds cyan to the cloud.
< map 18>
< map 19>
< map 20>
Classification: