For the users of Photoshop software, say to the reed side couples with the effect of the dawn of the tutorial.
1, open the original material large image, create an optional color adjustment layer, green adjustment, parameters and effect of the following figure. This step turns the green in the picture to green and darkens a little.
2, the creation of optional color adjustment layer, yellow, green and green adjustment, parameter settings such as Figure 3-5, the effect is shown in Figure 6. This step turns yellow into orange in the picture, and green cyan to darker green blue.
3, press CTRL + ALT + 2 to bring up the high light selection, press CTRL + Shift + I to select the dark selection, and then create a curve adjustment layer, RGB, red, green, blue channel adjustment, parameter settings such as Figure 7-10, the effect is as Figure 11. This step darkens the dark part of the picture and increases the bluish violet.
4, create a color balance adjustment layer, the shadow, highlight adjustment, parameter settings such as Figure 12,13, determined to press CTRL + ALT + G to create a clipping mask, the effect is as shown in Figure 14. This step mainly adds blue to the dark part of the picture.
5, create an optional color adjustment layer, red, yellow, blue, white, neutral color adjustment, parameter settings such as Figure 15-19, the effect is shown in Figure 20. This step is mainly to add orange to the picture, and the middle tone darkened a little.
6, CTRL + ALT + 2 up the highlight selection, and then create brightness/contrast adjustment layer, the appropriate increase in contrast, parameter settings such as Figure 21, determined to use the lower transparency of the black brush to wipe out the characters, the effect is as Figure 22. This step increases the contrast of the picture's high light area.
7, create curve adjustment layer, RGB, blue channel adjustment, parameter settings such as Figure 23,24, after the creation of a clipping mask, the effect is shown in Figure 25. This step increases the brightness contrast of the high light area.
8, the background layer to copy a layer, press CTRL + Shift +] Top, the following figure.
9. Enter the channel panel, copy the blue channel and get the blue copy channel. Press CTRL + L to adjust the color level of the blue Copy channel, make the sky area white, and darken the other areas. After determination, use the soft side black brush to paint the ground part black, the horizon area can be preserved partly gray, the following figure.
10, hold down the CTRL + + left mouse button click on the blue copy channel thumbnail, loading channel selection. Click the RGB channel to return to the Layers panel, create a new layer, and use the Paint bucket tool to fill the selection with white. Remove the background copy layer after you cancel the selection and the effect is shown below.
11, open the sky material large map, save to this machine, with PS Open, with mobile tools dragged in, create a clipping mask after adjusting the position, the effect of the following figure.
< small map view big picture >
12, select the menu: Filter > Blur > Gaussian blur, the value of 6, the sky part of the fuzzy processing, the effect of the following figure.
13, create curve adjustment layer, the RGB, red, blue channel adjustment, parameter settings such as Figure 31, after the creation of a clipping mask, the effect is shown in Figure 32. This step puts the sky part slightly darker and reduces the red and increases the blue.
14. Create a new layer, use the elliptical marquee tool to pull out the selection shown in the following figure, feather 55 pixels and fill with orange yellow: #E59C42, remove the selection after the blending mode to "overlay", the effect of the following figure.
15, press CTRL + J to copy the current layer, press CTRL + T slightly flatten a little, determine the blending mode to "soft light", the effect of the following figure.
16, press CTRL + J to copy the current layer, blending mode to "filter Color", the effect of the following figure.
17, press CTRL + J to copy the current layer, press CTRL + T a little smaller, determine the appropriate lower layer opacity, the effect of the following figure. These steps give the picture an orange-yellow high light.
18, create a new layer, blending mode to "soft light", the foreground color is set to orange: #EEBD5E, and then use the lower edge of the transparency of the brush to paint the surface part of the scene.
19, create curve adjustment layer, the RGB channel adjustment, parameter settings such as Figure 38, to determine the mask filled with black, and then use a soft white brush to the left and the bottom of the area wiped out, the effect is shown in Figure 39. This step adds a darker part to the picture.
20, copy the background layer, press CTRL + SHIFT +] top, press CTRL + SHIFT + U to color, and then change the blending mode to "multiply the bottom". Hold down the ALT key to add a layer mask, use the soft side white brush to darken the part of the dress that is too bright, as shown below.
21, press CTRL + ALT + 2 to bring up the high light selection, press CTRL + Shift + I to select the dark selection, and then create a curve adjustment layer, RGB, red, green, blue channel adjustment, parameter settings such as Figure 41-44, the effect is as figure 45. This step darkens the dark area a little bit.
Finally, add a little dark angle to the picture, then the overall soft treatment, complete the final effect.
Well, the above information is small compiled for you photoshop this software users bring the detailed to the reed side couple plus the effect of the morning to share the full content of the tutorial, in general, you can change the main color to a more unified warm and cold contrast color, and then replace the sky with the material with the rays; Then the edge of the area of the dark, so that you can better highlight the characters, I hope that the small set up to share the above can give everyone help.