1. user settings, FTP settings, IP restrictions, and so on are all under menu settings.
2. the user settings are also very simple. You can see the figure.
3. If you cannot connect to the ftp server, check the firewall on the server.
If you have installed the FTP server component in wiin2003/2008,
Uninstall the FTP server component or change the port before running the ftp server that comes with phpStudy.
4. if an error occurs
[Right] data Socket error: Connection timeout
[Right] list Error
[Right] PASV mode failed. Try PORT mode.
In passive mode, requests are sent from port 21 to the server, and then the Server opens the idle port for connection. The port opened by PASV is not opened in the firewall.
For ease of setting, this port range can be set to the same. Enable the corresponding port in the firewall. Set the ftp client to active mode.
5. Set the ftp client to Active Mode