Pny bingwei 4g usb flash drive for mass production

I bought a pny bienwei USB flash drive 4 GB licensed support Vista Leather cover limited edition

This USB flash drive
PNP device ID: vid = 1307 pid = 0165
Chip manufacturer: usbest)
Chip model: ut165

Download the ut165.10.0 mass production tool for mass production.

The following describes the production procedure.

The following items are successfully made in XP, but not in Vista.

1. Install ut165. Start MFPT and install the drivers required for mass production at the beginning.

The program is started. The following page is displayed.

2. Press F1 to set disk type: Fixed Point OK

3. Insert a USB flash drive. The following driver will be installed.

4. After the installation is complete, you can see the USB flash disk information. It may also need to be plugged in several times before it can be identified.

5. Press F1 and select the partition Setting tab. Select public area. Free space. Similar to a general hdd usb flash drive ). Select Autorun area (this is the H disk after the birth, that is, the CD disk after the birth .) Image File: Specifies the path of the file of the CD image to be simulated. Press OK.

6. Start mass production by space. It takes some time.

7. mass production is successful.

8. Select the driver on the software and check the driver before Uninstall. This is when the software is disabled, the driver used for mass production will be automatically uninstalled. This will not affect the normal use of the USB flash disk after the production tool is disabled.

After the mass production tool is disabled. Insert a USB flash disk to check the results of the batch production.

I bought a pny bienwei USB flash drive 4 GB licensed support Vista Leather cover limited edition

This USB flash drive
PNP device ID: vid = 1307 pid = 0165
Chip manufacturer: usbest)
Chip model: ut165

Download the ut165.10.0 mass production tool for mass production.

The following describes the production procedure.

The following items are successfully made in XP, but not in Vista.

1. Install ut165. Start MFPT and install the drivers required for mass production at the beginning.

The program is started. The following page is displayed.

2. Press F1 to set disk type: Fixed Point OK

3. Insert a USB flash drive. The following driver will be installed.

4. After the installation is complete, you can see the USB flash disk information. It may also need to be plugged in several times before it can be identified.

5. Press F1 and select the partition Setting tab. Select public area. Free space. Similar to a general hdd usb flash drive ). Select Autorun area (this is the H disk after the birth, that is, the CD disk after the birth .) Image File: Specifies the path of the file of the CD image to be simulated. Press OK.

6. Start mass production by space. It takes some time.

7. mass production is successful.

8. Select the driver on the software and check the driver before Uninstall. This is when the software is disabled, the driver used for mass production will be automatically uninstalled. This will not affect the normal use of the USB flash disk after the production tool is disabled.

After the mass production tool is disabled. Insert a USB flash disk to check the results of the batch production.

Finished.

Download address of the production tool

Http://ccc3a.blog.enorth.com.cn/attachment/zip/306652.rar

Http://ccc3a.blog.enorth.com.cn/attachment/zip/306654.rar

Http://ccc3a.blog.enorth.com.cn/attachment/zip/306655.rar