Port 2000 cannot be opened for Windows 1433 + SQL Server

1. If you are using win2003, you must install the SQL patch sp3a.

Check whether your SQL has been patched. If not, install a patch. You can run the patch in the query Analyzer:
Select @ version
If the version is earlier than 8.00.760, it indicates that you have not installed the SP3 patch.

SQL patch download:
Positions of All Patches
Http://www.microsoft.com/downloads/details.aspx? Displaylang = ZH-CN & familyid = 9032f608-160a-4537-a2b6-4cb265b80766

Note that after downloading the package, decompress the package and execute setup. bat in the decompressed directory.

2. Four Common Errors in SQL Server connection:

1. "SQL server does not exist or access is denied"

This is the most complex. There are many causes of errors and there are many aspects to check.

Generally, there are several possibilities:

1. incorrect spelling of the SQL server name or IP address
2. The server network configuration is incorrect.
3. The client network configuration is incorrect.

To solve this problem, we generally need to follow the steps below to find out the cause of the error step by step.

============== First, check the network physical connection ================
Ping <Server IP Address/Server Name>

If the ping <Server IP address> fails, the physical connection is faulty. In this case, Check hardware devices, such as NICs, hubs, and routers.
Another possibility is that a firewall software is installed between the client and the server. For example, the ISA Server. firewall software may block the Ping and telnet responses.
Therefore, when checking for connection problems, we must temporarily disable the firewall software or open all closed ports.

If the ping <Server IP address> succeeds, the ping <Server Name> fails.
It indicates that there is a problem with name resolution. At this time, check whether the DNS service is normal.
Sometimes the client and server are not in the same LAN. At this time, the server name may not be used to identify the server. At this time, we can use the hosts file for name resolution,
The specific method is:

1. Use notepad to open the hosts file (usually in c: \ winnt \ system32 \ drivers \ etc ).
Add a record corresponding to the IP address and server name, for example:
172.1610.24 myserver

2. You can also configure it in the SQL Server Client Network utility, which will be described in detail later.

============ Second, use the Telnet command to check the running status of the SQL Server server ==============
Telnet <Server IP addresses> 1433

If the command is successfully executed, you can see that the cursor keeps flashing in the upper left corner after the screen flashes. This indicates that the SQL Server is working normally and is listening for TCP/IP connection at port 1433.
If the command returns an error message "unable to open the connection", it indicates that the server has not started the SQL Server service,
The TCP/IP protocol may not be enabled on the server, or the server does not listen on the default port 1433 of SQL Server.

Then, we need to check the network configuration on the server and whether the named pipe is enabled. whether or not the TCP/IP protocol is enabled ================
SQL Server's built-in server network tools can be used for inspection.

Click: program -- Microsoft SQL Server -- server network usage Tool

After you open the tool, you can see which protocols are enabled on the server in "General.
In general, we enable Named Pipes and TCP/IP protocols.
Click "properties" in the TCP/IP protocol to check the default port settings of the sqk Server service.
Generally, we use the default port 1433 of SQL Server. if you select "Hide server", it means that the client cannot see this server by enumerating the server. This protects the server, but does not affect the connection.

============== Next we will go to the client to check the network configuration of the client ================
We can also use the client network tools provided by SQL Server to perform checks,
The difference is that this tool is run on the client this time.

Click: program -- Microsoft SQL Server -- client network usage Tool

After the tool is enabled, You can see which protocols are enabled on the client in the "General" item.
In general, we also need to enable the named pipe and TCP/IP protocol.
Click TCP/IP protocol and select "properties" to check the default connection port settings of the client. The port must be consistent with the server.

Click the "alias" tab and configure the alias for the server. The server alias is the name used for connection,
The server in the connection parameter is the real server name. The two can be the same or different. The alias settings are similar to those in the hosts file.

Through the above checks, the first error can be basically ruled out.

-----------------------------------------------------------------------------

2. "unable to connect to the server, user XXX Login Failed"

This error occurs because SQL server uses the "Windows only" authentication method,
Therefore, you cannot connect to the SQL Server login account (such as SA). The solution is as follows:

1. Use the enterprise manager on the server side and select "use Windows Authentication" to connect to SQL Server
In Enterprise Manager
-- Right-click your server instance (the one with the green icon)
-- Edit SQL Server Registration attributes
-- Select "use Windows Authentication"

2. Expand "SQL Server group", right-click the name of the SQL Server server, select "properties", and then select the "Security" tab.
3. Under "authentication", select "SQL Server and Windows ".
4. Restart the SQL Server service.

In the preceding solution, if you fail to connect to SQL server by using "use Windows Authentication" in step 1,
Modify the Registry to solve this problem:

1. Click "start"-"run", enter regedit, and press enter to enter the Registry Editor.
2. Expand the registry key in sequence and browse to the following registry key:
[HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ MSSQLServer]
3. Find the name "loginmode" on the right of the screen and double-click to edit the double-byte value.
4. Change the original value from 1 to 2 and click "OK"
5. Disable Registry Editor
6. Restart the SQL Server service.

In this case, you can successfully use SA to create an SQL Server registration in the Enterprise Manager,
However, you still cannot connect to SQL Server in Windows Authentication mode.
This is because there are two default logon accounts in SQL Server:
Builtin \ Administrators
<Machine Name> \ Administrator deleted.
To restore these two accounts, you can use the following methods:

1. Open the Enterprise Manager, expand the server group, and then expand the server
2. Expand security, right-click logon, and click New logon"
3. In the Name box, enter builtin \ Administrators
4. On the "server role" tab, select "System Administrators"
5. Click "OK" to exit
6. Use the same method to add <machine Name> \ administrator to log on.

Note:

The following registry key:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ MSSQLServer \ loginmode
The value determines the Authentication mode that SQL server will adopt.
1. indicates that the "Windows Authentication" mode is used.
2. indicates that the hybrid mode is used (Windows Authentication and SQL Server Authentication ).

-----------------------------------------------------------------------------

3. Prompt connection timeout

If a third error occurs, it generally indicates that the client has found this server and can connect to it,
However, an error occurs because the connection time exceeds the allowed time.
This usually occurs when you run the enterprise manager on the Internet to register another server that is also on the Internet,
In addition, during slow connection, the above timeout error may occur. In some cases, this error may also occur due to lan network problems.

To solve this problem, you can modify the connection timeout settings of the client.
By default, the timeout setting for registering another SQL server through the Enterprise Manager is 4 seconds,
The query analyzer is 15 seconds (this is also the reason why there is a high possibility of errors in the Enterprise Manager ).

The procedure is as follows:
Settings in Enterprise Manager:
1. In Enterprise Manager, select "Tools" from the menu, and then select "options"
2. In the displayed "SQL Server Enterprise Manager properties" window, click the "advanced" tab.
3. Enter a large number in the "Login timeout (seconds)" box on the right under "connection settings", for example, 20.

Query settings in Analyzer:
Tool -- option -- connection -- set logon timeout to a large number

---------------------------------------------------------------------------------

4. Most servers use TCP/IP to succeed. Can I use named pipes once?

Reply to: leimin)
 
This is because in Windows 2000 and later operating systems, Ms configures TCP/IP for SQL Server security issues.
Is the default connection protocol of sqlserver. You can see TCP/IP and name pipe in client network utility.
.

You can also:
[HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ MSSQLServer \ Client \ supersocketnetlib]
"Protocolorder" = hex (7 ):,
See the default protocol.

2. How to change named pipes, TCP/IP in the program, and how to write the SQL statement?
You can modify the Registry location as mentioned above:
Client:
[HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ MSSQLServer \ Client \ supersocketnetlib]
"Protocolorder" = hex (7 ):,

Server:
[HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ MSSQLServer \ supersocketnetlib]
"Protocolorder" = hex (7 ):,

In SQL, the connection configuration is in these two aspects

SQL Server server -- start -- program -- Microsoft SQL Server
-- Server network utility
-- Enable Winsock Proxy
-- Proxy address: (sqlserver Server IP)
-- Proxy port -- 1433
--- OK

Client
Start -- program -- Microsoft SQL Server -- client network utility
-- Alias -- add
-- Select "TCP/IP" for the network library -- enter the SQL server name as the server alias
-- Connection parameter -- enter the SQL Server IP address in the server name
-- If you have modified the SQL port, deselect "dynamically determine port" and enter the corresponding port number.