Port ing of Common Agent software

1. How do I set up a web, FTP, and mail server for Sygate In the lan?

--------------------------------------------------------------------------------

Set the access rule in Sygate. The setting method is as follows:
For example, if your dialing machine is 192.168.0.1 and the Web server is at 192.168.0.10.
The setting method is to go to the menu tools
-> Add in access rules
-> Import a rule from System
-> Select our web server in the drop-down box,
Then use "detail" to see
Direction: In,
Client 192.168.0.10,
Destport: 80.

2. How do I set port forwarding in "Internet Connection Sharing" in windows?

--------------------------------------------------------------------------------

In the example of setting up a web server on the internal PC 192.168.1.2, the general default Web port is 80 and is set as follows:
1. Right-click "Network neighbors" on the "desktop" and view "properties ";
2. Right-click the network connection, View "share" in "properties", and click "set ";
3. Click "add" in the "service" tab, enter the name you want in "service name", for example, "Web", and enter 80 in "service port, select TCP as the protocol used.
4. Enter the IP address of the server that provides internal services in "name or address of the dedicated network server computer", and click "OK ".

3. How do I set up a Web server for WinRoute In the lan?

--------------------------------------------------------------------------------

Taking web server as an example:
1. Open WinRoute administration.
2. click Settings> advanced> port mapping and click Add on the port mapping page to open the Settings dialog box.
3. select TCP in protocol.
4. Select listen Single Port and enter the port number 80.
5. In destination, enter the internal network address of the computer that provides web services, for example, 192.168.0.10.
6. Click OK.
7. reconnect to the Internet

4. How do I set up a web server in the LAN for Wingate?

--------------------------------------------------------------------------------

Taking web server as an example:
1. enable keeper, click WWW Proxy service on the left, right-click, and enter the WWW Proxy service attribute page. On the general page, set the service port to the port used for publishing the web, which is generally 80, in this way, Wingate opens an HTTP proxy service with port 80.
2. Go to the bindings page and select allow connections coming in on any Internet connections as the first option.
3. On the non-proxy requests page, reject request is selected by default and changed to pipe request through to predetermined. In the server and port columns below, enter the IP address and port (for example, 192.168.0.10 and 80) of the machine that provides Web Services in the LAN ).
In this way, Wingate forwards external HTTP requests to port 80 to port 80 of the computer whose IP address is 192.168.0.10 in the LAN. As long as the iis on the 192.168.0.80 computer correctly sets port 80 for the Web service, it can be accessed from outside the LAN.
4. Confirm and save the settings.

5. How to Use porttunnel for port forwarding to set up a web server in the lan?

--------------------------------------------------------------------------------

Take the Web server as an example. The gateway address is 192.168.0.1, and the Intranet address of the web server is 192.168.0.10:
1. First, no port 80 is occupied on 192.168.0.1;
2. Install the "porttunnel" software on 192.168.0.1;
3. Run the "porttunnel" software and click "add" in the first window;
4. In the pop-up window, configure "Main" as follows:
Name: Web
Enabled: Check
Port in: 80
Bind Address: Any (0.0.0.0)
Port out: 80
Address out: 192.168.0.10
5. Click "OK" to save the configuration.

Port ing of common ADSL Routers

Http://www.blogbus.com/blogbus/blog/diary.php? Diaryid = 287128
Http://www.blogbus.com/blogbus/blog/diary.php? Diaryid = 287101