Port ing settings of the ADSL modem in Heqin 642

Method: Enter Telnet 192.168.1.1 in the running or msdos window.
Enter the password (the factory default value is 1234) to enter the zynos system. The main menu shown in
Copyright (c) 1994-2000 zyxel Communications Corp.
Prestige 642r-11 Main Menu

Getting started advanced management
1. General setup 21. filter set configuration
3. Ethernet setup 22. SNMP Configuration
4. Internet access setup 23. System Password
24. System Maintenance
25. IP routing policy setup
Advanced Applications
11. remote node setup
12. Static Routing setup
15. SUA Server SETUP 99. Exit

Choose menu 11.1-remote node profile.

Rem node name = changeme route = IP
Active = Yes bridge = No

Encapsulation = pppoe edit PPP options = No
Multiplexing = LLC-based rem ip addr = 0.0.0.0
Incoming: Edit IP/IPX/Bridge = No
Rem login =
Rem Password = ********
Outgoing: session options:
My login = czz7205800 @ ADSL edit filter sets = No
My password = ******** pppoe idle timeout (SEC) = 0
Authen = chap/PAP pppoe service name =
Schedule sets =

Press enter to confirm or ESC to cancel:

Note that after the edit filter sets = No Space key is changed to yes, go to the following menu:

Menu 11.5-remote node Filter

Input filter sets:
Protocol filters = 6
Device filters =
Output filter sets:
Protocol filters =
Device filters =
Call filter sets:
Protocol filters =
Device filters =

Enter here to confirm or ESC to cancel:

Remove the 6-Space key and press enter to save the disk. Then, return the edit filter sets = No. Press enter to save the disk and set 15

Menu 15-Sua Server SETUP

Port # IP Address
---------------------
1. Default 192.168.1.2 (Map all ports to this host)
2. 0 0.0.0.0
3. 0 0.0.0.0
4. 0 0.0.0.0
5. 0 0.0.0.0
6. 0 0.0.0.0
7. 0 0.0.0.0
8. 0 0.0.0.0

Press enter to confirm or ESC to cancel: