To give you Photoshop software users to detailed analysis to share the production of liquid water skirt effect of the later tutorial.
One: To find material pictures to pull the map, do background, synthesis. The female model should not be disposed of where the child sees it. Actually it's OK not to dispose of it. I'm afraid of being harmonized.
Two: Create new layer (named water Contour Line a), draw the water group contour.
The students of the drawing board suggested using the 5PX brush, the mouse classmate suggested using 4PX coarse brush. The key word for this step is painting (contour). The outline can be in bold strokes.
Mouse students do not see this want to give up, because as long as the painting is probably possible, not necessarily very beautiful.
To talk about the problems I encountered here, yesterday after trying to make the outline of water directly, the result looks very rough. I suggest that after the outline is finished with a rough stroke. Scribble a few times with a 1-pixel pen. The shadow is around the rough contour line. Shaking hands is better.
There is also need to pay attention to the point is the divergence of water, especially the female mold breasts of the water skirt, to have the feeling of milk ^ ^ and the water skirt skirt pendulum of the droplets do not draw too much. If you look at the size just fine, then unfortunately tell you, you have painted big. The future will not be as effective as water. It's like ice.
In short, the whole skirt painting bold point, open point, wave a little, right. What, I didn't draw enough waves? Well, I admit I'm afraid of being harmonious ...
Three: This step I am very confused. Because I put the last thing I did in here. But I don't think there's anything wrong with that. It's easier to get a clear idea.
Now create a new layer (named Layer water skirt fill a). With a 1-pixel brush in the contour of your just water skirt tu ah. To what extent? Please look at the picture.
This step should be noted that must not make the pen thick. The students who tried the mouse suggested that the brush should be adjusted to about 40-60 transparency.
Here our main production is water skirt of water filling
Four: the preparation before the irrigation ~!
We're going to perform a filter-twisted-glass.
But it is effective to make this filter directly on a hollow line.
So will (water contour line A) duplicate the layer. Create a new layer below the--> (water contour a) layer and fill it with black. The two layers are then merged. The effect is as follows. Then say the merged layer named (Contour A1) and then copy the layer named (Contour A2)
This step is actually very simple. Just for the sake of precaution. Copy one when standby. Then build a black layer. Combine lines and black layers. Then go and execute the filter glass.
V: The initial formation of water
The excitement of the moment came. Hide the unused layers first. (Of course, leave the beauty model and the background layer, you ask me?) Selection layer (contour line A1) perform filter-twist-Glass
The specific parameters are as follows.
Then select the layer (contour A2) to perform the filter-twist-Glass
It is necessary to note that the filter parameters are not necessarily shine. Can be adjusted according to the situation. My idea is that these two layers will be stacked together in the future to color. So a little bit different.
Six: Now the line has been curved. The entire tutorial uses two filters altogether. Maybe I'm not quite sure about filters yet. There are some things I have done by myself. If a man with a filter can be done must not keep yo.
Dizzy, said to find the whole topic. Continue to make water. This step is mainly to be merged in the black background of the white Water group Contour line extraction. Some of the students said. Color filter in layer blending mode is it done? NoNoNo you can't do that. Because we're going to paint. Because you have a big mouth, you play your little JJ 100 times!
Cough. It's off the topic again. Don't hit me, huh? Pull out the white object on the black background. Here I use the Channel cutout method. Others have any better moves to greet. Select the Contour line layer (one of which is two are selected) into the channel. Select any one of the color channels. Copy the channel. Then hold down the CTRL point on the copy channel to your left mouse button. Found that the constituency was established--! then returned to the layers panel. Select the contour layer. Bring it back to RGB mode, and then press ctrl+j that is (copy the selection through the new layer) now, please remove the guy who just copied it. Don't take it anymore. Hey. (Here you will be surprised, how I copied the Dongdong with black edge) don't worry. Lock layer Transparent area (that is, a button with a small block on top of the small rectangle behind the locked one below the layer blending mode). =) Then press the keyboard (D) to reset the color, and then press Ctrl+delete to fill the contour of the water group with white, OK. This time the contour line is normal. If you say the entire canvas is filled with white then please look at this textbook.
In this way, the contour of another water group is also filled with white.
Seven: Naturally, if the students have done nothing wrong. Two contour layers should be open at the same time.
If you don't do it right. Please read it from above or reply to questions
The current layer order should be the contour line A2 on the A1. If the layers are not in order, please correct them.
Hide A2. Copy 1 to 1 and then use (hide). Locks the transparent area of the A1 layer. The contour line of water supply group is colored. As shown in the picture, put on why black and yellow. It's because ..... Reflection of light and shadow?
I made a rough one, too. And then copy a layer to place it under the original layer level, layer blending mode for color Dodge (Hide) * * * * * believe that whether it is a drawing board classmate or mouse students should soon be done.
Eight: Will A2 copy a layer hides, then the picture inside A1 and A2 together displays. This is what you'll find. The contour of the water jacket is too bright. You can use a layer mask to trim off some too bright parts. As shown in figure
Nine: The A2 copy layer, that is, the A2 (replica) layer filled to gray 9b9c9a change the layer blending mode color deepened, the idea of adjusting the picture of the model body is not in place. Erase or layer mask off
X: Place the A1 layer at the bottom of the A1 A2 series layer hierarchy before the fill color. (The layer is original A1 layer is not filled with color, pure white)
11: Now the water skirt has begun to take shape. If you are a lazy person, then this textbook can not be read.
Our work below is to continue to refine still remember the first contour line I asked you to copy that layer? Find it. Place it under the A1A2 series level. Then use the rubber live layer template to erase the extra parts. To accentuate the edge texture of the water skirt. No pictures are placed here. The students are imagining themselves doing it. Don't be confined to the house. In short, you look pleasing to the eye, natural on it.
12: Remember the old friends? almost forgotten. That's the first thing I asked you to paint. A water fill, as in the figure, performs the filter-twist-glass (this textbook mainly surrounds this filter) parameter as follows
And then dig up the picture. Or channel-pull method, and then lock the transparent area to fill it with white. Then copy a layer of padding into gray and place it below the original level. Transparency 35. Apply a few layers with the blur tool and change the layer blending mode to multiply. and slightly more color with the brush.
13: Open the hidden guys. If you don't see them, let the hunters play the flare.
If you're right, it's supposed to be like this now.
Then the female mold in the water in the body part of the twist, I copied a layer to twist. How convenient for you to come. This step is mainly the refraction of water can make objects distorted (specifically I do not understand =. =)
14: The model's legs out of the skirt (*^__^*) method to figure out
Suggest a new layer at the top level, with a brush (1 pixels thick) to the filter is not accounted for clearly in the place.
Well, the above information is small compiled to you photoshop this software users brought to the detailed production of liquid water skirt effect of the later tutorial analysis of the entire content of the share, you see the users here now you are very clear about the production of the tutorial, So now you go to follow the small series of the tutorial to make it yourself.
