Postek C168 Barcode Printer label paper and ribbon mounting

Booz has Postek C168 barcode printer Small and lightweight, powerful, its unique "convection cooling structure" and "left-right structure" patent design, to ensure that the product in the persistent operation, heat dissipation fast, stable performance, easy maintenance, to provide users with great convenience. Removable reflective paper detectors can calibrate different specifications of the label paper, and equipped with a fixed penetrating paper detector, can easily achieve the hole-like label paper positioning.

Postek C168 by virtue of its simplicity, ease of use, but also powerful features to win a more competitive print market, the following Shenzhen mutual trust and technology to the graphic way to introduce the installation of the machine:

One, the carbon belt installs

1), the installation of recovery shaft

2), the installation of carbon tape

Second, the installation of label paper

Third, set Dip jumper

If you are printing an interval of label paper, and need to tear the paper, you need to set the dip jumper, jumper switch at the bottom of the printer, refer to the following figure, is generally the 2nd switch dial down, there are some machines need to put the 5th switch simultaneously dial down:

Precautions:

One, the label paper face up, flat through the bottom of the machine.

Second, the machine at the bottom of each side has a Green Paper press, to press the label paper, can be left and right to move the paper feeder, but also do not card too tightly,

There is a little bit of room for the label paper to move around.

If the label paper should be placed on the outside bracket, there are two protruding cards on the outer bracket, which can be jammed with the two slots on the bottom of the printer card.

This ensures that the label paper in print is not offset.

In the printing if found to hit the side of the word, that is, the label paper is not fixed well.